PT. SOUTH PACIFIC VISCOSE a Member of LENZING GROUP (Multinational Company a Producers of Viscose Staple Fibers and Sodium Sulfate)
1. Utility Operator (UO):
- STM/D3 Graduate
- At least 1-2 Years of experience in chiller, blower, AHU, cooling tower
2. Utility Mechanic (UM):
- STM/D3 Graduate
- At least 1-2 Years of experience in chiller, blower, AHU, cooling tower
3. Foreman Utility (FU):
- S1 Graduate Majoring in Mechanical Engineering
- 1-2 Years of Experience
- Fresh graduate in mechanical (min GPA:3.00) are welcome to Apply.
4. Boiler Operator (BO):
- STM/D3 Graduate
- At Least 1-2 Years of experience in Boiler
- Having certificate class 2.
If You meet the requirement please send your complete CV to
recruitment@pt-spv.com
PLEASE PUT POSITION CODE IN YOUR SUBJECT E-MAIL. IT IS A MANDATORY.
Wednesday, September 30, 2009
Tuesday, September 29, 2009
Mechanical Supervisor (MEC-SPV)
PT TITAN Petrokimia Nusantara
Advertised: 28-9-09 Closing Date: 27-10-09
We are an established, multinational, growing technology-driven olefins and polyolefin’s producer located at Merak, Cilegon. We are continuously seeking committed and talented individuals to join our team, and now we invite people who have the right attitude, experience, drive and the spirit of adventure to be:
Mechanical Supervisor (MEC-SPV)
(Cilegon)
Requirements:
- Minimum Diploma Degree D3 (preferably S1) Majoring in Mechanical Engineering, with IPK greater than 2.75 of scale 4.0
- Minimum 5 years of experience in Operating Company (Petrochemical or Petroleum Plants), assigned as Rotating/Mechanical Supervisor in Maintenance Department structures
- Strong in analysing data of plant condition monitoring and come up with remedial measures thru corrective maintenance and review on PM and maintenance strategy
- Strong in troubleshooting and further repair to failures on rotating equipment : shaft seal leak, bearing high vibration, cavitation, surge, deadhead, performance and efficiency down
- Proficiency in installation, disassembly & reassembly of compressor (centrifugal, reciprocating, lobe, screws, liquid ring), pump (centrifugal, positive displacement, axial-propeller & other special design rotating equipment and valves
- Familiar and able to review PM program and interval based on historical records and current circumstances
- Familiar and able to control mechanical maintenance area of : planning, criticality of equipment / spare parts, KPI (metrics) and audit
- Proficiency in supervisory, leading a team of permanent technician and contractor or vendor from various technical background and attitudes/cultures
- Familiar and able to conduct RCFA
- Understand the design, operation, maintenance and troubleshooting of rotating equipment (pump & compressor), other special design rotating equipment and valves including limitation on rated capacity
- Familiar with MS office and CMMS program
- HSE knowledge : Fire and gas, hazardous area classification, environmental aspects-impact, and safety reviews
- Understands general hydrocarbon processing and petrochemical process
- Understands and familiar with Engineering Code and Standards :
- API on application of : rotating equipment (design, operating and maintenance), valve, piping and static equipment inspection codes
- NFPA on application of : fire water base system and maintenance
- Ability to communicate fluently in English and Indonesian, written and spoken
- Computer literacy in Microsoft Office and other general computer program
What be needed to submit:
- Application Letter
- Curriculum Vitae
- Copy of Academic Transcript
- The latest photograph (size 4 x 6 cm, colour)
Submit above requirements, before October 30, 2009 to:
recruitment@pttitan.com
(put MEC-SPV Code on your email subject)
or :
Human Resources
PT. TITAN Petrokimia Nusantara
Jl. Raya Merak Km. 116 - Merak
Cilegon 42436
(put MEC-SPV Code on the Up Left Corner of your envelope)
To apply online:
http://id.jobstreet.com/jobs/2009/9/default/40/90161.htm?fr=L
Advertised: 28-9-09 Closing Date: 27-10-09
We are an established, multinational, growing technology-driven olefins and polyolefin’s producer located at Merak, Cilegon. We are continuously seeking committed and talented individuals to join our team, and now we invite people who have the right attitude, experience, drive and the spirit of adventure to be:
Mechanical Supervisor (MEC-SPV)
(Cilegon)
Requirements:
- Minimum Diploma Degree D3 (preferably S1) Majoring in Mechanical Engineering, with IPK greater than 2.75 of scale 4.0
- Minimum 5 years of experience in Operating Company (Petrochemical or Petroleum Plants), assigned as Rotating/Mechanical Supervisor in Maintenance Department structures
- Strong in analysing data of plant condition monitoring and come up with remedial measures thru corrective maintenance and review on PM and maintenance strategy
- Strong in troubleshooting and further repair to failures on rotating equipment : shaft seal leak, bearing high vibration, cavitation, surge, deadhead, performance and efficiency down
- Proficiency in installation, disassembly & reassembly of compressor (centrifugal, reciprocating, lobe, screws, liquid ring), pump (centrifugal, positive displacement, axial-propeller & other special design rotating equipment and valves
- Familiar and able to review PM program and interval based on historical records and current circumstances
- Familiar and able to control mechanical maintenance area of : planning, criticality of equipment / spare parts, KPI (metrics) and audit
- Proficiency in supervisory, leading a team of permanent technician and contractor or vendor from various technical background and attitudes/cultures
- Familiar and able to conduct RCFA
- Understand the design, operation, maintenance and troubleshooting of rotating equipment (pump & compressor), other special design rotating equipment and valves including limitation on rated capacity
- Familiar with MS office and CMMS program
- HSE knowledge : Fire and gas, hazardous area classification, environmental aspects-impact, and safety reviews
- Understands general hydrocarbon processing and petrochemical process
- Understands and familiar with Engineering Code and Standards :
- API on application of : rotating equipment (design, operating and maintenance), valve, piping and static equipment inspection codes
- NFPA on application of : fire water base system and maintenance
- Ability to communicate fluently in English and Indonesian, written and spoken
- Computer literacy in Microsoft Office and other general computer program
What be needed to submit:
- Application Letter
- Curriculum Vitae
- Copy of Academic Transcript
- The latest photograph (size 4 x 6 cm, colour)
Submit above requirements, before October 30, 2009 to:
recruitment@pttitan.com
(put MEC-SPV Code on your email subject)
or :
Human Resources
PT. TITAN Petrokimia Nusantara
Jl. Raya Merak Km. 116 - Merak
Cilegon 42436
(put MEC-SPV Code on the Up Left Corner of your envelope)
To apply online:
http://id.jobstreet.com/jobs/2009/9/default/40/90161.htm?fr=L
Sunday, September 27, 2009
Pipeline Engineer - Abu Dhabi, United Arab Emirates
Pipeline Engineer
Updated: Sep 26 2009
Employer: Brunel Energy LLC
Desired Expertise: Pipeline Engineering, Mechanical, Design Development Oil Gas Projects
Experience: 10+ years
Education: Bachelors/3-5 yr Degree
Location: Abu Dhabi, United Arab Emirates
Reference Code: 24292
Job Description:
We are looking for a high caliber professional with a proven track record in the oil and gas, petrochemical and refinery industries with the ability to add value to an already highly successful team, you will be familiar with best practice methodologies and have an appetite for managing high quality people, processes and situations to ensure total excellence.
Key basic function and scope include:
1. Direct & supervise a team of pipeline engineers providing expertise and ensures the application of correct standards in the design and development of projects associated with gas processing, production and export.
2. Responsible for design, construction, materials requisitioning, and construction of pipelines and related facilities including supervision of inspectors and contractors during construction and start-up.
Key qualifications:
1. A bachelor's degree or equivalent degree in Mechanical or Chemical Engineering from an accredited university.
2. 10-15 years post graduate experience in design & development of capital projects in the oil/gas industry at senior level.
3. Work effectively with peers in a multi-disciplinary environment.
4. Good command of written and spoken English
To apply:
http://www.rigzone.com/jobs/job_posting.asp?p_id=70779
Updated: Sep 26 2009
Employer: Brunel Energy LLC
Desired Expertise: Pipeline Engineering, Mechanical, Design Development Oil Gas Projects
Experience: 10+ years
Education: Bachelors/3-5 yr Degree
Location: Abu Dhabi, United Arab Emirates
Reference Code: 24292
Job Description:
We are looking for a high caliber professional with a proven track record in the oil and gas, petrochemical and refinery industries with the ability to add value to an already highly successful team, you will be familiar with best practice methodologies and have an appetite for managing high quality people, processes and situations to ensure total excellence.
Key basic function and scope include:
1. Direct & supervise a team of pipeline engineers providing expertise and ensures the application of correct standards in the design and development of projects associated with gas processing, production and export.
2. Responsible for design, construction, materials requisitioning, and construction of pipelines and related facilities including supervision of inspectors and contractors during construction and start-up.
Key qualifications:
1. A bachelor's degree or equivalent degree in Mechanical or Chemical Engineering from an accredited university.
2. 10-15 years post graduate experience in design & development of capital projects in the oil/gas industry at senior level.
3. Work effectively with peers in a multi-disciplinary environment.
4. Good command of written and spoken English
To apply:
http://www.rigzone.com/jobs/job_posting.asp?p_id=70779
Supervisor Service Engineer (SE)
PT Tunas Dwipa Matra
Kami perusahaan otomotif Main Daeler & Retail sepeda motor Honda di Lampung, bekerjasama dengan PT. Astra Honda Motor (AHM) mengundang individu yang bertalenta dan mempunyai keberanian untuk mengembangkan Perusahaan kami di Bandar Lampung dengan posisi dan kualifikasi sebagai berikut :
Supervisor Service Engineer (SE)
(Lampung)
Requirements:
Laki-Laki atau Wanita.
Usia antara 25 - 35 tahun.
Pend. S1 (Teknik Mesin)
Pengalaman min 1 tahun dilevel Spv Service Engineer, diutamakan di perusahaan otomotif sepeda motor
Keterampilan manage Network H2 Main Dealer, Ms Office, komunikatif, bertanggungjawab
Domisili Bandar Lampung & siap ditempatkan di Head Office Bandar Lampung
Bagi yang menyukai tantangan silakan kirim lamaran & CV ke alamat :
HRD Department
PT. Tunas Dwipa Matra.
Jl. Reden Intan No. 65, Bandar Lampung
atau
Email : zainal.abidin@intra.tunasgroup.com
Or apply online:
http://id.jobstreet.com/jobs/2009/9/default/40/90103.htm?fr=L
Kami perusahaan otomotif Main Daeler & Retail sepeda motor Honda di Lampung, bekerjasama dengan PT. Astra Honda Motor (AHM) mengundang individu yang bertalenta dan mempunyai keberanian untuk mengembangkan Perusahaan kami di Bandar Lampung dengan posisi dan kualifikasi sebagai berikut :
Supervisor Service Engineer (SE)
(Lampung)
Requirements:
Laki-Laki atau Wanita.
Usia antara 25 - 35 tahun.
Pend. S1 (Teknik Mesin)
Pengalaman min 1 tahun dilevel Spv Service Engineer, diutamakan di perusahaan otomotif sepeda motor
Keterampilan manage Network H2 Main Dealer, Ms Office, komunikatif, bertanggungjawab
Domisili Bandar Lampung & siap ditempatkan di Head Office Bandar Lampung
Bagi yang menyukai tantangan silakan kirim lamaran & CV ke alamat :
HRD Department
PT. Tunas Dwipa Matra.
Jl. Reden Intan No. 65, Bandar Lampung
atau
Email : zainal.abidin@intra.tunasgroup.com
Or apply online:
http://id.jobstreet.com/jobs/2009/9/default/40/90103.htm?fr=L
Friday, September 25, 2009
Esco - Various
BEsco is recognized as a global player in containment, clean air and laboratory equipment technology. We are highly oriented towards the international marketplace, with distribution in more than 70 countries and a direct presence in 10 of the key global markets. Esco embodies innovation, forward-thinking design, coupled with a tradition of quality since 1978.
Esco is recruiting the best people for our Bintan office:
1. Mechanical Design Engineer
Responsibilities:
* Deliver innovative mechanical designs, fabrication, and specification for production
* Create piece part and assembly level CAD 3D models, drawings and design specifications. Apply Six Sigma design principles to ensure robustness and Design for Manufacturability
* Develop specific mechanical components / mechanisms to be integrated with final product
* Plan, schedule and manage mechanical project deliverables in a coordinated, multi-disciplinary project team environment. Responsible for all mechanical aspects of each project from design through to release to tooling and manufacturing
* Ensure the integrity of all mechanical design outputs, including documentation, revision control, product regulatory testing and approvals, intellectual property opportunities, etc
* Coordinate with other functions outside of R&D including production, product management, outside agencies, vendors, etc
* Perform or direct tasks in support of new product development efforts such as drafting, literature, research, prototype fabrication, experiments, testing, etc. Assist in budget and resource forecasting for departmental activities and technical projects
* Carry out performance optimization, cost analyses, prototyping, and design support for production
Requirements:
* Bachelor degree in Mechanical Engineering or relevant, preferably specialized in Design
* At least 2-3 year's of hands-on experience designing mechanical components and assemblies
* Good knowledge with 2D/3D CAD/ CAM software, preferably Vertex and Solid work, ProEng, and AutoCAD
* Must be able to create parts, multi-component assemblies and dimensioned drawings to company standards. Strong ability with geometric and dimensional tolerance analysis, tolerance stack-up and tolerance optimization.
* Strong background in materials, production fabrication techniques, computational fluid dynamics (CFD), and processes including sheet metal processing, other background in injection molding, die-casting and machining will be an advantage.
* Prior experience in a product development / R&D environment is an advantage
* Excellent written and verbal communication skills and demonstrated ability in documenting technical work to make the complex simple.
* Emphasis will be placed on candidates who have demonstrated success in taking similar products through the complete design cycle
* Good command of spoken and written English
* Fresh graduate are welcomed to apply
2. Electronics Engineer
Responsibilities:
* Electronics design and product development, from conceptualization, initial design, prototyping, to implementation
o Embedded system hardware and firmware design
o Digital and analog electronic circuit design
o Power electronics
o PCB design and layout
o PC software for monitoring and control applications
* Carry out performance optimization, cost analysis, prototyping, until production
* Component selection, testing, and evaluation
* Work closely with customers and internal cross-functional teams to ensure products meet all specifications
* Hardware, firmware, and software documentation (design documents, flowcharts, operation manuals, test procedures, etc.
* Troubleshooting, analysis, and debugging of firmware and hardware for existing products
* Writing of technical specifications for submission to subcontractors for circuit design, firmware coding, contract manufacturing for certain products
Requirements:
* Bachelor degree in Computer Engineering / Electronics, with strong background in embedded system design
* Relevant work experience of 2-3 years in a product development / R&D environment
* Strong skills in C programming languagE
* Experienced in PCB design
* Experience with any of the following will be a plus: DAQ systems (Labview), product safety standards (UL, TUV), EMC testing and countermeasures, PC software development
* Excellent technical writing, documentation, and communication skills
* Good command in written and spoken English
* Innovative, resourceful, and able to work independently or in a team
* Junior positions are available for fresh graduates with strong interests
3. Chemist
Responsibilities:
* Manage small projects
* Manage analytical tests
* Review progress of projects and initiate appropriate actions to achieve project objectives
* Responsible for performing microbiological testing on raw materials and intermediates
* Participate in the development of protocols
* Write project reports
* Manage the microbiological laboratory
Requirements:
* Bachelor / Master degree in Physics Chemistry
* Knowledge of activated carbon
* Prior experience working in chemistry research project or laboratory will be an advantage
* Strong analytical skills, attention to details, meticulous, and good in figures
* Competent in Microsoft Office application
* Familiar to use spectro-chromatogra phy
* Good command in written and spoken English
4. Electrical (Assembly)
Responsibilities:
* Liaising with production supervisor/ engineer for product scheduling and flow to fulfill export schedule
* Improve assembly process in order to reduce waste and increase efficiency
Requirements:
* Diploma in Electrical Engineering
* Good knowledge of Microsoft Office (Word, Excel, etc)
* Able to work under pressure and tight schedule
* Good command in written and spoken English
* Willing to and able to work in a cross functional team environment
5. Electrical Testing
Responsibilities:
* Liaising with production supervisor/ engineer for product scheduling and flow to fulfill export schedule
* Troubleshoot electrical problem and provide fast solution and prevention action
* Conduct electrical safety test
Requirements:
* Diploma in Electrical Engineering
* Able to draw single line drawing
* Have good knowledge in AC motors, relays, electronic ballast, EMC, electrical safety standard, PLC Siemens, etc.
* Good knowledge of Microsoft Office (Word, Excel, etc)
* Able to work under pressure and tight schedule
* Good command in written and spoken English
* Willing to and able to work in a cross functional team environment
Please send your resume to:
hrbintan2@escogloba l.com
Indicating:
- Position you apply for
- Expected salary
- Reason of leaving
Esco is recruiting the best people for our Bintan office:
1. Mechanical Design Engineer
Responsibilities:
* Deliver innovative mechanical designs, fabrication, and specification for production
* Create piece part and assembly level CAD 3D models, drawings and design specifications. Apply Six Sigma design principles to ensure robustness and Design for Manufacturability
* Develop specific mechanical components / mechanisms to be integrated with final product
* Plan, schedule and manage mechanical project deliverables in a coordinated, multi-disciplinary project team environment. Responsible for all mechanical aspects of each project from design through to release to tooling and manufacturing
* Ensure the integrity of all mechanical design outputs, including documentation, revision control, product regulatory testing and approvals, intellectual property opportunities, etc
* Coordinate with other functions outside of R&D including production, product management, outside agencies, vendors, etc
* Perform or direct tasks in support of new product development efforts such as drafting, literature, research, prototype fabrication, experiments, testing, etc. Assist in budget and resource forecasting for departmental activities and technical projects
* Carry out performance optimization, cost analyses, prototyping, and design support for production
Requirements:
* Bachelor degree in Mechanical Engineering or relevant, preferably specialized in Design
* At least 2-3 year's of hands-on experience designing mechanical components and assemblies
* Good knowledge with 2D/3D CAD/ CAM software, preferably Vertex and Solid work, ProEng, and AutoCAD
* Must be able to create parts, multi-component assemblies and dimensioned drawings to company standards. Strong ability with geometric and dimensional tolerance analysis, tolerance stack-up and tolerance optimization.
* Strong background in materials, production fabrication techniques, computational fluid dynamics (CFD), and processes including sheet metal processing, other background in injection molding, die-casting and machining will be an advantage.
* Prior experience in a product development / R&D environment is an advantage
* Excellent written and verbal communication skills and demonstrated ability in documenting technical work to make the complex simple.
* Emphasis will be placed on candidates who have demonstrated success in taking similar products through the complete design cycle
* Good command of spoken and written English
* Fresh graduate are welcomed to apply
2. Electronics Engineer
Responsibilities:
* Electronics design and product development, from conceptualization, initial design, prototyping, to implementation
o Embedded system hardware and firmware design
o Digital and analog electronic circuit design
o Power electronics
o PCB design and layout
o PC software for monitoring and control applications
* Carry out performance optimization, cost analysis, prototyping, until production
* Component selection, testing, and evaluation
* Work closely with customers and internal cross-functional teams to ensure products meet all specifications
* Hardware, firmware, and software documentation (design documents, flowcharts, operation manuals, test procedures, etc.
* Troubleshooting, analysis, and debugging of firmware and hardware for existing products
* Writing of technical specifications for submission to subcontractors for circuit design, firmware coding, contract manufacturing for certain products
Requirements:
* Bachelor degree in Computer Engineering / Electronics, with strong background in embedded system design
* Relevant work experience of 2-3 years in a product development / R&D environment
* Strong skills in C programming languagE
* Experienced in PCB design
* Experience with any of the following will be a plus: DAQ systems (Labview), product safety standards (UL, TUV), EMC testing and countermeasures, PC software development
* Excellent technical writing, documentation, and communication skills
* Good command in written and spoken English
* Innovative, resourceful, and able to work independently or in a team
* Junior positions are available for fresh graduates with strong interests
3. Chemist
Responsibilities:
* Manage small projects
* Manage analytical tests
* Review progress of projects and initiate appropriate actions to achieve project objectives
* Responsible for performing microbiological testing on raw materials and intermediates
* Participate in the development of protocols
* Write project reports
* Manage the microbiological laboratory
Requirements:
* Bachelor / Master degree in Physics Chemistry
* Knowledge of activated carbon
* Prior experience working in chemistry research project or laboratory will be an advantage
* Strong analytical skills, attention to details, meticulous, and good in figures
* Competent in Microsoft Office application
* Familiar to use spectro-chromatogra phy
* Good command in written and spoken English
4. Electrical (Assembly)
Responsibilities:
* Liaising with production supervisor/ engineer for product scheduling and flow to fulfill export schedule
* Improve assembly process in order to reduce waste and increase efficiency
Requirements:
* Diploma in Electrical Engineering
* Good knowledge of Microsoft Office (Word, Excel, etc)
* Able to work under pressure and tight schedule
* Good command in written and spoken English
* Willing to and able to work in a cross functional team environment
5. Electrical Testing
Responsibilities:
* Liaising with production supervisor/ engineer for product scheduling and flow to fulfill export schedule
* Troubleshoot electrical problem and provide fast solution and prevention action
* Conduct electrical safety test
Requirements:
* Diploma in Electrical Engineering
* Able to draw single line drawing
* Have good knowledge in AC motors, relays, electronic ballast, EMC, electrical safety standard, PLC Siemens, etc.
* Good knowledge of Microsoft Office (Word, Excel, etc)
* Able to work under pressure and tight schedule
* Good command in written and spoken English
* Willing to and able to work in a cross functional team environment
Please send your resume to:
hrbintan2@escogloba l.com
Indicating:
- Position you apply for
- Expected salary
- Reason of leaving
Sunday, September 20, 2009
TOTAL E&P INDONESIE: Vacancy for various positions
TOTAL is the world’s fifth-largest international oil and gas company and a world-class chemical manufacturer which employs more than 110,000 people in over 130 countries worldwide.
TOTAL E&P INDONESIE is a 100% Indonesian Subsidiary of the Parisbased TOTAL Group, having its Head Office in Jakarta and operational sites in East Kalimantan. Due to the high-level development activities to meet the increasing hydrocarbon production commitment, TOTAL E&P INDONESIE invites highly qualified professionals to apply for the following position:
INSTRUMENT MAINTENANCE ENGINEER
CONTROL SYSTEM ENGINEER
PIPELINE ENGINEER
CERTIFICATION ENGINEER
INSPECTION ENGINEER
OFFSHORE PROJECT ENGINEER
SAFETY & METHOD ENGINEER
METHOD & PROCEDURE ENGINEER
TURBINE & ROTATING (MAINTENANCE) ENGINEER
Interested applicants could see detailed qualification and apply to :
www.careers.total.com (select country: Indonesia) or to
TOTAL E&P INDONESIE is a 100% Indonesian Subsidiary of the Parisbased TOTAL Group, having its Head Office in Jakarta and operational sites in East Kalimantan. Due to the high-level development activities to meet the increasing hydrocarbon production commitment, TOTAL E&P INDONESIE invites highly qualified professionals to apply for the following position:
INSTRUMENT MAINTENANCE ENGINEER
CONTROL SYSTEM ENGINEER
PIPELINE ENGINEER
CERTIFICATION ENGINEER
INSPECTION ENGINEER
OFFSHORE PROJECT ENGINEER
SAFETY & METHOD ENGINEER
METHOD & PROCEDURE ENGINEER
TURBINE & ROTATING (MAINTENANCE) ENGINEER
Interested applicants could see detailed qualification and apply to :
www.careers.total.com (select country: Indonesia) or to
ep-id-drh.recruitment@total.com (indicating the position applied in the email subject)
General Requirement: willing to be relocated to Balikpapan.
General Requirement: willing to be relocated to Balikpapan.
TOTAL E&P INDONESIE: Vacancy for CONTRACT ENGINEER
TOTAL is the world’s fifth-largest international oil and gas company and a world-class chemical manufacturer which employs more than 110,000 people in over 130 countries worldwide.
TOTAL E&P INDONESIE is a 100% Indonesian Subsidiary of the Parisbased TOTAL Group, having its Head Office in Jakartaand operational sites in East Kalimantan. Due to the high-level development activities to meet the increasing hydrocarbon production commitment, TOTAL E&P INDONESIE invites highly qualified professionals to apply for the following position:
CONTRACT ENGINEER
TOTAL E&P INDONESIE is a 100% Indonesian Subsidiary of the Parisbased TOTAL Group, having its Head Office in Jakartaand operational sites in East Kalimantan. Due to the high-level development activities to meet the increasing hydrocarbon production commitment, TOTAL E&P INDONESIE invites highly qualified professionals to apply for the following position:
CONTRACT ENGINEER
Job Description:
- Giving advice to Project Management concerning contractual issues (esp. conditions and obligations) affecting the outcome in term of financial, legal and scheduling aspects
- Coordinate, manage and control overall process of contractual administration
- Detect (anticipate w/ Project & Estimating team) variations & changes to the contract, and follow up claims and final account until settlement and contract close out
- Giving advice to Project Management concerning contractual issues (esp. conditions and obligations) affecting the outcome in term of financial, legal and scheduling aspects
- Coordinate, manage and control overall process of contractual administration
- Detect (anticipate w/ Project & Estimating team) variations & changes to the contract, and follow up claims and final account until settlement and contract close out
- Review incomings/outgoings to protect Company's contractual position.
Requirements:
- Bachelor Degree in these Engineering majors : Civil, Mechanical, Electrical, Industrial or other equivalence
- Minimum 5 years of experience in:
- Project and construction work/practices and project management.
- Managing (or other hands-on experience related to) construction contract is an advantage
- Operational experience of contracts drafting is an advantage
- Understanding of project / construction aspects in Oil and Gas business.
Interested applicants could see detailed qualification and apply to :
www.careers.total.com (select country: Indonesia) or to
- Bachelor Degree in these Engineering majors : Civil, Mechanical, Electrical, Industrial or other equivalence
- Minimum 5 years of experience in:
- Project and construction work/practices and project management.
- Managing (or other hands-on experience related to) construction contract is an advantage
- Operational experience of contracts drafting is an advantage
- Understanding of project / construction aspects in Oil and Gas business.
Interested applicants could see detailed qualification and apply to :
www.careers.total.com (select country: Indonesia) or to
ep-id-drh.recruitment@total.com (indicating the position applied in the email subject)
General Requirement: willing to be relocated to Balikpapan.
General Requirement: willing to be relocated to Balikpapan.
QA Structural/Mechanical - REQUIRED IMMEDIATELY
REQUIRED IMMEDIATELY
Well established multidiscipline construction and engineering PMA company invite qualified and experienced professionals who can work as a team, with proven competencies in the whole range of development and improvement initiatives, to fill the following position:
QA Structural/Mechanical
Well established multidiscipline construction and engineering PMA company invite qualified and experienced professionals who can work as a team, with proven competencies in the whole range of development and improvement initiatives, to fill the following position:
QA Structural/Mechanical
Will be based on Project Site
Post Date: 14 September 2009
Requirements:
· Minimum S-1 or Diploma (D3) with majoring of Mechanical or Civil Engineering
· At least 3 years experience in a similar position in Construction , Mining / Oil & Gas Industry
· Familiar with various Standard of Inspection such as AWS, API & ASME, etc
· Familiar with mechanical equipment such as Crusher, Belt Conveyor, Vibrating Screen, SAB/Ball Mill, Slury Pump will be an advantage.
· Good communication skill in Bahasa and English both verbal and written.
· Must have hands on attitude to the work environment.
· Diligent and able to work under pressure, self motivated with a positive working attitude.
· This position is available at the Project Location
· Ability to read & interpret drawing
· Accommodation, meals and transport will be provided
· R & R leave will be provided
For those who meet the above requirements please send your application letter, curriculum vitae, copy of references and one recent photograph, and put “QA Mechanical” or
“QA Structural” in subject, not later than one week
after this advertisement to:
Post Date: 14 September 2009
Requirements:
· Minimum S-1 or Diploma (D3) with majoring of Mechanical or Civil Engineering
· At least 3 years experience in a similar position in Construction , Mining / Oil & Gas Industry
· Familiar with various Standard of Inspection such as AWS, API & ASME, etc
· Familiar with mechanical equipment such as Crusher, Belt Conveyor, Vibrating Screen, SAB/Ball Mill, Slury Pump will be an advantage.
· Good communication skill in Bahasa and English both verbal and written.
· Must have hands on attitude to the work environment.
· Diligent and able to work under pressure, self motivated with a positive working attitude.
· This position is available at the Project Location
· Ability to read & interpret drawing
· Accommodation, meals and transport will be provided
· R & R leave will be provided
For those who meet the above requirements please send your application letter, curriculum vitae, copy of references and one recent photograph, and put “QA Mechanical” or
“QA Structural” in subject, not later than one week
after this advertisement to:
moch.yusuf@macdow.com.au
Moch Yusuf | HR Officer
Moch Yusuf | HR Officer
PT. McConnell Dowell Indonesia
Jakarta Selatan DKI Jakarta , Indonesia
www.mcconnelldowell.com
Jakarta Selatan DKI Jakarta , Indonesia
www.mcconnelldowell.com
Mechanical Inspector - REQUIRED IMMEDIATELY
REQUIRED IMMEDIATELY
Well established multidiscipline construction and engineering PMA company invite qualified and experienced professionals who can work as a team, with proven competencies in the whole range of development and improvement initiatives, to fill the following position:
Mechanical Inspector
Will be based on Project Site
Post Date: 14 September 2009
Requirements:
· Minimum Bachelor Degree in Mechanical Engineering
· At least 5 years experience in a similar position in Construction , Mining / Oil & Gas Industry
· Familiar to manage audits, inspections and reviews. Also ensure a safe and reliable operation in accordance with HSE requirement.
· Familiar with mechanical equipment such as Crusher, Belt Conveyor, Vibrating Screen, SAB/Ball Mill, Slurry Pump will be an advantage.
· Good communication skill in Bahasa and English both verbal and written.
· Must have hands on attitude to the work environment.
· Diligent and able to work under pressure, self motivated with a positive working attitude.
· This position is available at the Project Location
· Ability to read & interpret drawing
· Accommodation, meals and transport will be provided
· R & R leave will be provided
For those who meet the above requirements please send your application letter, curriculum vitae, copy of references and one recent photograph, and put “Mechanical Inspector”
in subject, not later than one week after this advertisement to:
Well established multidiscipline construction and engineering PMA company invite qualified and experienced professionals who can work as a team, with proven competencies in the whole range of development and improvement initiatives, to fill the following position:
Mechanical Inspector
Will be based on Project Site
Post Date: 14 September 2009
Requirements:
· Minimum Bachelor Degree in Mechanical Engineering
· At least 5 years experience in a similar position in Construction , Mining / Oil & Gas Industry
· Familiar to manage audits, inspections and reviews. Also ensure a safe and reliable operation in accordance with HSE requirement.
· Familiar with mechanical equipment such as Crusher, Belt Conveyor, Vibrating Screen, SAB/Ball Mill, Slurry Pump will be an advantage.
· Good communication skill in Bahasa and English both verbal and written.
· Must have hands on attitude to the work environment.
· Diligent and able to work under pressure, self motivated with a positive working attitude.
· This position is available at the Project Location
· Ability to read & interpret drawing
· Accommodation, meals and transport will be provided
· R & R leave will be provided
For those who meet the above requirements please send your application letter, curriculum vitae, copy of references and one recent photograph, and put “Mechanical Inspector”
in subject, not later than one week after this advertisement to:
PT. McConnell Dowell Indonesia
Jakarta Selatan DKI Jakarta , Indonesia
www.mcconnelldowell.com
Jakarta Selatan DKI Jakarta , Indonesia
www.mcconnelldowell.com
Wednesday, September 16, 2009
Senior Sales Engineer
Advertised: 16-9-09 | Closing Date: 15-10-09
Basuki Pratama Engineering
Senior Sales Engineer
(Jakarta Raya)
Requirements:
- Minimum S1 Degree in Technical from a reputation University
- Minimum 3 years exeprience in construction of industrial plant and power plant
- Have a good technical knowledge on mechanical equipment such as Boiler of Power Plant / Industrial Plant
- Maximum age 35 years old
- Language proficiency verbal and written both English and Bahasa Indonesia, preferably Mandarin
- Must have good leadership, entepreneurship, communication skill, high integrity and loyalty
- Able to work independently
- Good responsibility & highly motivated
JSA(spasi)APPLY(spasi)EZVPJP
Send to 9333
Mechanical Supervisor
Advertised: 16-9-09 | Closing Date: 15-10-09
Well established multidiscipline construction and engineering PMA company invite qualified and experienced professionals who can work as a team, with proven competencies in the whole range of development and improvement initiatives, to fill the following position:
Mechanical Supervisor
(Jakarta Raya)
Requirements:
- Minimum Diploma (D3) Degree in Mechanical Engineering
- At least 5 years experience in a similar position in Construction , Mining / Oil & Gas Industry
- Experienced in Mechanical Preventive Maintenance and trouble shooting such as Hydraulic and pneumatic system, rotating equipment.
- Familiar with mechanical equipment such as Crusher, Belt Conveyor, Vibrating Screen, SAB/Ball Mill, and Slurry Pump will be an advantage.
- Having knowledge on mechanical safety
- Good communication skill in Bahasa and English both verbal and written.
- Must have hands on attitude to the work environment.
- Diligent and able to work under pressure, self motivated with a positive working attitude.
- This position is available at the Project Location
- Ability to read & interpret drawing
- Accommodation, meals and transport will be provided
- R & R leave will be provided
hrindo@macdow.com.au
Mechanical Inspector
Advertised: 16-9-09 | Closing Date: 15-10-09
Well established multidiscipline construction and engineering PMA company invite qualified and experienced professionals who can work as a team, with proven competencies in the whole range of development and improvement initiatives, to fill the following position:
Mechanical Inspector
(Jakarta Raya)
Requirements:
- Minimum Bachelor Degree in Mechanical Engineering
- At least 5 years experience in a similar position in Construction , Mining / Oil & Gas Industry
- Familiar to manage audits, inspections and reviews. Also ensure a safe and reliable operation in accordance with HSE requirement.
- Familiar with mechanical equipment such as Crusher, Belt Conveyor, Vibrating Screen, SAB/Ball Mill, Slurry Pump will be an advantage.
- Good communication skill in Bahasa and English both verbal and written.
- Must have hands on attitude to the work environment.
- Diligent and able to work under pressure, self motivated with a positive working attitude.
- This position is available at the Project Location
- Ability to read & interpret drawing
- Accommodation, meals and transport will be provided
- R & R leave will be provided
hrindo@macdow.com.au
Crushing Plant & Port Supervisor
Advertised: 15-9-09 | Closing Date: 14-10-09
PT. Pipit Mutiara Jaya is a coal miner and producer in East Kalimantan with its representative office in Jakarta, urgently seeking potential and experienced applicants to join the company for below full time positions:
Crushing Plant & Port Supervisor
(Kalimantan Timur)
Requirements:
- Candidate must possess at least a Bachelor's Degree in Engineering (Mining), Engineering (Mechanical), Engineering (Electrical)
- At least 2 year(s) of working experience in Coal Crushing Plant & Port.
- Good communication, hard worker
- Able to work in shift
- Willing to work in Sebakis, Kabupaten Nunukan, Kalimantan Timur
hr@pipit-pmj.co.id
Monday, September 14, 2009
Operation Environmental, Health & Safety (EHS) Coordinator
PT SUPRACO INDONESIA
We are one of the Support Service Company for Oil and Gas Sector in Indonesia, seeking to expand our team by recruiting competent, highly motivated and experience professional to fill the following positions:
URGENTLY REQUIRED :
Operation Environmental, Health & Safety (EHS) Coordinator
General Requirements:
1. A degree in Engineering (S-1 Engineer Mechanical, Electrical, Civil or other Technical background) with at least 10 years experiences in oil and gas Operations, Petrochemical or Mining Industry,
2. Have formal EHS qualifications such as NEBOSH Certificate, Lead Auditor (Incident Investigator), On Scene Commander in Oil Spill Response,
3. Have good knowledge of EHS management System and its implementation and mastering English language oral and written,
4. Has ability and experience to develop and deliver EHS training,
5. Has developed sufficient computer knowledge and can with operate Microsoft Office,
6. Experience in Incident Investigation and Audit Compliance is a plus.
Please send your complete resume/CV to:
HRD Department
recruitment@supraco.com
We are one of the Support Service Company for Oil and Gas Sector in Indonesia, seeking to expand our team by recruiting competent, highly motivated and experience professional to fill the following positions:
URGENTLY REQUIRED :
Operation Environmental, Health & Safety (EHS) Coordinator
General Requirements:
1. A degree in Engineering (S-1 Engineer Mechanical, Electrical, Civil or other Technical background) with at least 10 years experiences in oil and gas Operations, Petrochemical or Mining Industry,
2. Have formal EHS qualifications such as NEBOSH Certificate, Lead Auditor (Incident Investigator), On Scene Commander in Oil Spill Response,
3. Have good knowledge of EHS management System and its implementation and mastering English language oral and written,
4. Has ability and experience to develop and deliver EHS training,
5. Has developed sufficient computer knowledge and can with operate Microsoft Office,
6. Experience in Incident Investigation and Audit Compliance is a plus.
Please send your complete resume/CV to:
HRD Department
recruitment@supraco.com
Sunday, September 13, 2009
ENGINEERS
ENGINEERS
With worldwide operation and due to rapidly growth of our nearest project to support oil & gas facilities, we are seeking highly talented and professional engineers to join with our team for the following position:
Piping Engineer (PE) focus onlayout & stress
Civil Engineers (CE)
Safety Engineer (SE) focus onsafety design
Electrical Engineer (EE)focus on design
Instrument Engineers (IE)focus on design
Mechanical Rotating Engineer(MR)
Mechanical Static Engineer(MS)
PDMS Administrator (PA)PDMS Designer (PS)
Process Engineer (PR) focuson system
Material Engineer (ME)
Pipeline Engineer (PP)
Requirements:
Minimum experience extensively 7 years in EPC company with oil & gas projects
Bachelor degree/Diploma inrelated field
Familiar with standard codein related positions
Comprehend with related software for each position
For those who interested and qualified, please send your CV to epc_job@rocketmail.
indicate job code in your email subject.
With worldwide operation and due to rapidly growth of our nearest project to support oil & gas facilities, we are seeking highly talented and professional engineers to join with our team for the following position:
Piping Engineer (PE) focus onlayout & stress
Civil Engineers (CE)
Safety Engineer (SE) focus onsafety design
Electrical Engineer (EE)focus on design
Instrument Engineers (IE)focus on design
Mechanical Rotating Engineer(MR)
Mechanical Static Engineer(MS)
PDMS Administrator (PA)PDMS Designer (PS)
Process Engineer (PR) focuson system
Material Engineer (ME)
Pipeline Engineer (PP)
Requirements:
Minimum experience extensively 7 years in EPC company with oil & gas projects
Bachelor degree/Diploma inrelated field
Familiar with standard codein related positions
Comprehend with related software for each position
For those who interested and qualified, please send your CV to epc_job@rocketmail.
indicate job code in your email subject.
Saturday, September 12, 2009
Mechanical Engineer - Bulk Solid Material Handling
Mechanical Engineer - Bulk Solid Material Handling - Malaysia
Updated: Sep 11 2009
Employer: Progressive
Desired Expertise: Mechanical Engineering, Bulk Solid Material Handling, Mining
Experience: 8+ years
Education: Bachelors/3-5 yr Degree
Salary: $10,000 - $12,000 USD pm
Location: Kuala Lumpur, Malaysia
Job Description:
Major EPC in Kuala Lumpur, Malaysia, requires Senior Mechanical Engineer - Bulk Solid Material Handling for a 1-2 year contract role.
You must have the following experience:
Minimum of 8 years experience in System design (mining plant, cement plant) in Bulk Solid material handling, ship unloading, stock pile stacking and reclaiming, ore preparation plant, lime stone crushing plant
Type of bulk material - nickel ore, sulphur, lime stone
Equipment - belt conveyor, overland conveyor, crusher / sizer, feeder, dust suppression, chutes, hopper, screener, stacker, reclaimer, ship unloading
The role involves the following;
BFS study / cost estimation
Detailed design of plant equipment
Interfacing with other disciplines within the company / client
Provide basic engineering design, perform calculation / report
Produce deliverables for material requisition, scope of supply, equipment / package specification and data sheet for bidding purpose
Equipment / package technical bid evaluation (TBE) and clarification (TC)
Produce technical evaluation report for Award recommendation (PO)
Vendor data review (VDR)
Technical support to site and field engineering queries (if needed)
Send your CV for immediate consideration.
Apply online:
http://www.rigzone.com/jobs/job_posting.asp?p_id=69959
Updated: Sep 11 2009
Employer: Progressive
Desired Expertise: Mechanical Engineering, Bulk Solid Material Handling, Mining
Experience: 8+ years
Education: Bachelors/3-5 yr Degree
Salary: $10,000 - $12,000 USD pm
Location: Kuala Lumpur, Malaysia
Job Description:
Major EPC in Kuala Lumpur, Malaysia, requires Senior Mechanical Engineer - Bulk Solid Material Handling for a 1-2 year contract role.
You must have the following experience:
Minimum of 8 years experience in System design (mining plant, cement plant) in Bulk Solid material handling, ship unloading, stock pile stacking and reclaiming, ore preparation plant, lime stone crushing plant
Type of bulk material - nickel ore, sulphur, lime stone
Equipment - belt conveyor, overland conveyor, crusher / sizer, feeder, dust suppression, chutes, hopper, screener, stacker, reclaimer, ship unloading
The role involves the following;
BFS study / cost estimation
Detailed design of plant equipment
Interfacing with other disciplines within the company / client
Provide basic engineering design, perform calculation / report
Produce deliverables for material requisition, scope of supply, equipment / package specification and data sheet for bidding purpose
Equipment / package technical bid evaluation (TBE) and clarification (TC)
Produce technical evaluation report for Award recommendation (PO)
Vendor data review (VDR)
Technical support to site and field engineering queries (if needed)
Send your CV for immediate consideration.
Apply online:
http://www.rigzone.com/jobs/job_posting.asp?p_id=69959
MANAGEMENT TRAINEE - Smart Tbk
POSITION : MANAGEMENT TRAINEE
Smart Tbk Downstream - batch 5
DESCRIPTION :
- Pria / Wanita lajang, maks. 28 th.
- Sarjana Teknik Mesin (konversi energi), Teknik Kimia, Teknik Elektro (arus lemah, arus kuat), Teknik Industri dan Teknologi Pangan dengan IPK min. 2,9
- Bersedia penempatan di seluruh wilayah operasional perusahaan
- Menguasai Microsoft Office & Bahasa Inggris
- Siap bergabung 2 Oktober 2009
Please vist www.smart-tbk.com for detail and application
Smart Tbk Downstream - batch 5
DESCRIPTION :
- Pria / Wanita lajang, maks. 28 th.
- Sarjana Teknik Mesin (konversi energi), Teknik Kimia, Teknik Elektro (arus lemah, arus kuat), Teknik Industri dan Teknologi Pangan dengan IPK min. 2,9
- Bersedia penempatan di seluruh wilayah operasional perusahaan
- Menguasai Microsoft Office & Bahasa Inggris
- Siap bergabung 2 Oktober 2009
Please vist www.smart-tbk.com for detail and application
Friday, September 11, 2009
SALES ENGINEER (SE)
SAS INTERNASIONAL, PT
URGENTLY REQUIRED
We immediately require suitable candidates to fill the following position:
SALES ENGINEER (SE)
Post Date: 08 Sep 09
Requirements:
- University Graduate (S1) with Electrical or Mechanical Engineering from reputable university
- Minimum 3 years experience as sales or marketing preferable in oil & gas or fertilizer industry
- Having sales oriented
- Excellent analytical, communication, interpersonal and presentation skill
- Computer Literate is a must
- Good English for both conversation & correspondence is a must
- Willing to travel frequently and sent on duty for certain period of time.
Responsibilities:
- Seek and identify new market opportunities/customer, especially in oil & gas/fertilizer industry
- Develop & manage the sales and marketing activities to create products sales & increase the population of main & associated products
- Prepare & submit of all required monthly & annually reports
- Establish & develop relationship with existing and new potential customers
- Achieve sales products according to budget
- Establish & maintain exceptional lines of communication with direct super-ordinate & company affiliates
- Manage business development and commercial process including tendering process and contract negotiation.
Please send your application letter with detailed resume/CV, stating details of qualifications and summary of experiences, present/ expected salary, and other supporting documents, current photograph not later than two weeks after this advertisement to:
HRD SECTION
Jl. Raya Kebayoran Lama Pal. VII No. 31, Jakarta 12210
or by email to: hrd@sasinternasional.com
Career Level Middle
Qualification Degree
Yr(s) Exp 3 year(s)
Job Category Engineering - Electrical / Electronics, Engineering - Mechanical, Sales - Technical Sales / Sales Engineer
Job Location DKI Jakarta - Jakarta
Salary Negotiable
Job Type Full Time, Permanent
or apply via Jobsdb:
http://id.jobsdb.com/id/EN/Job.asp?R=JDBID031487482
URGENTLY REQUIRED
We immediately require suitable candidates to fill the following position:
SALES ENGINEER (SE)
Post Date: 08 Sep 09
Requirements:
- University Graduate (S1) with Electrical or Mechanical Engineering from reputable university
- Minimum 3 years experience as sales or marketing preferable in oil & gas or fertilizer industry
- Having sales oriented
- Excellent analytical, communication, interpersonal and presentation skill
- Computer Literate is a must
- Good English for both conversation & correspondence is a must
- Willing to travel frequently and sent on duty for certain period of time.
Responsibilities:
- Seek and identify new market opportunities/customer, especially in oil & gas/fertilizer industry
- Develop & manage the sales and marketing activities to create products sales & increase the population of main & associated products
- Prepare & submit of all required monthly & annually reports
- Establish & develop relationship with existing and new potential customers
- Achieve sales products according to budget
- Establish & maintain exceptional lines of communication with direct super-ordinate & company affiliates
- Manage business development and commercial process including tendering process and contract negotiation.
Please send your application letter with detailed resume/CV, stating details of qualifications and summary of experiences, present/ expected salary, and other supporting documents, current photograph not later than two weeks after this advertisement to:
HRD SECTION
Jl. Raya Kebayoran Lama Pal. VII No. 31, Jakarta 12210
or by email to: hrd@sasinternasional.com
Career Level Middle
Qualification Degree
Yr(s) Exp 3 year(s)
Job Category Engineering - Electrical / Electronics, Engineering - Mechanical, Sales - Technical Sales / Sales Engineer
Job Location DKI Jakarta - Jakarta
Salary Negotiable
Job Type Full Time, Permanent
or apply via Jobsdb:
http://id.jobsdb.com/id/EN/Job.asp?R=JDBID031487482
PRODUCTION ENGINEER
LANGGENG MAKMUR PLASTIC INDUSTRY TBK, PT (JAKARTA)
Urgently Required
A new joint venture company with an Australian company has created new openings in our company. This new company focuses on plastic packaging and storage solutions. Products such as : bottles, containers, crates, tubes, drums, etc.
PRODUCTION ENGINEER
Post Date: 10 Sep 09
Kualifikasi :
- Pria
- Pendidikan S1 Teknik Industri / Teknik Mesin
- Bisa mengoperasikan komputer (ms word, ms excel) dan internet
- Berpengalaman bekerja di industri manufaktur
- Mengetahui cara operasional mesin industri plastik (injection,blowing, extrusion)
- Dapat bekerja di dalam tim maupun secara individu dengan pengawasan minimum
- Bertanggung jawab dan punya inisiatif
- Dapat bekerja di bawah tekanan dengan jadwal yang ketat
- Mempunyai kemampuan berkomunikasi yang bagus
Deskripsi kerja
- Memeriksa data setting mesin
- Pemeriksaan harian kondisi mesin
- Mempersiapkan dan memastikan produksi berjalan sesuai jadwal
If you think you have qualification such above, please send your application enclosed with curriculum vitae and recent photograph to :
HRD Department
email: rino_nurdiansyah@yahoo.com
For more information about our company, please visit our website :
http://www.langgengmakmur.com/ or http://www.langgeng.com/
Career Level Middle
Qualification Degree
Yr(s) Exp N/A
Job Category Engineering - Manufacturing & Production, Manufacturing - Manufacturing Management, Manufacturing - Product Development / Management
Job Location DKI Jakarta - Jakarta
Salary Negotiable
Job Type Full Time, Permanent
or apply via Jobsdb:
http://id.jobsdb.com/id/EN/Job.asp?R=JDBID031542782
Urgently Required
A new joint venture company with an Australian company has created new openings in our company. This new company focuses on plastic packaging and storage solutions. Products such as : bottles, containers, crates, tubes, drums, etc.
PRODUCTION ENGINEER
Post Date: 10 Sep 09
Kualifikasi :
- Pria
- Pendidikan S1 Teknik Industri / Teknik Mesin
- Bisa mengoperasikan komputer (ms word, ms excel) dan internet
- Berpengalaman bekerja di industri manufaktur
- Mengetahui cara operasional mesin industri plastik (injection,blowing, extrusion)
- Dapat bekerja di dalam tim maupun secara individu dengan pengawasan minimum
- Bertanggung jawab dan punya inisiatif
- Dapat bekerja di bawah tekanan dengan jadwal yang ketat
- Mempunyai kemampuan berkomunikasi yang bagus
Deskripsi kerja
- Memeriksa data setting mesin
- Pemeriksaan harian kondisi mesin
- Mempersiapkan dan memastikan produksi berjalan sesuai jadwal
If you think you have qualification such above, please send your application enclosed with curriculum vitae and recent photograph to :
HRD Department
email: rino_nurdiansyah@yahoo.com
For more information about our company, please visit our website :
http://www.langgengmakmur.com/ or http://www.langgeng.com/
Career Level Middle
Qualification Degree
Yr(s) Exp N/A
Job Category Engineering - Manufacturing & Production, Manufacturing - Manufacturing Management, Manufacturing - Product Development / Management
Job Location DKI Jakarta - Jakarta
Salary Negotiable
Job Type Full Time, Permanent
or apply via Jobsdb:
http://id.jobsdb.com/id/EN/Job.asp?R=JDBID031542782
AL- BARRAK INDUSTRIAL SERVICES - Various
AL- BARRAK INDUSTRIAL SERVICES, an engineering service company opens positions for their project in Saudi Arabia:
1. CONDITION MONITORING ENGINEER (15 NOS)
Minimum 5 to 7 years of experience in same position in Petrochemical Plant, Responsible for condition monitoring, reliability and performance evaluation aspect of the rotating Machine Trains (Driver & driven) ofassigned plants. Regular management and ensures availability of software alarms, machinery information, base lines data, start-up/shutdown data for critical machines and historical data in online and offline machinery management systems.
2. ROTATING EQUIPMENT ENGINEER (15 NOS)
Minimum BS in Mechanical Engineering or equivalent. 5 to 7 years experience in Mechanical Engineering, including Rotating Equipment maintenance, condition monitoring in a Refinery, Power or ProcessPlants. Maintenance and corrective procedure of rotating and associated equipment specifically Centrifugal Compressors.
3. CONDITION MONITORING TECHNICIAN (15 NOS)
Minimum of 3 years in the field of Condition Monitoring in the Petrochemical, Refinery & Oil and Gas Plants. Carry out Condition Monitoring of the Plant Installed Rotating Equipments by Data Acquisition Techniques and Data Analysis. Carry out daily inspection, predictive maintenance and data collection on rotating machinery such as compressors, pumps, fans, blowers, gearboxes, motors, steam and gasturbines and turbo expanders.
4. ONLINE ANALYZER TECHNICIAN (10 NOS)
Minimum 7 years of experience in Electronics or Instrumentation fault diagnosis, breakdown repair, preventive maintenance and overhaul work, including at least 5 years Analyzer experience in Petrochemical or Oil Industry. Monitors physical inspection of process analyzers in all plant units. Must have knowledge for the following online analyzers, Yokogawa, Siemens GC, Oxygen, Infrared, NOX, TOC, IR & UV, Specific Gravity, Silica, Chlorine, PH and Conductivity Analyzers.
5. INSTRUMENT ENGINEERS (10 NOS)
6. INSTRUMENT TECHNICIAN (15 NOS)
7. MECHANICAL ENGINEERS (10 NOS)
8. MECHANICAL TECHNICIAN (15 NOS)
9. ELECTRICAL ENGINEERS (10 NOS)
10. ELECTRICAL TECHNICIAN (15 NOS)
Terms & Conditions:
a. Salary
- Engineer : SR 8000 (minimum, negotiable) + 25% of Basic Salary accommodation allowance + 10% of Basic Salary for transportation.
- Technician : SR 3500 - 5500
b. Contract : 2 yrs
c. Working hours / Day: 8 hours / 6 days.
d. Over Time : As per local law
e. Food : Provided Free
f. Accommodation : Provided Free
g. Medication : Provided
h. Leave : 30 days after 12 months (Paid)
i. Air ticket : Provided (Return)
If you feel you are match with above positions, you are welcome to send CV, in MS Word, not more than 300kb to
arthur@totaldata.co.id
Please put position desired in your email subject. We are sorry, only shortlist candidates will be notified.
For more info's, please call us at:
PT. Totaldata Persada
021-8477689, 021-84994728.
Attn.: Ms. Dika/Ms. Eva
1. CONDITION MONITORING ENGINEER (15 NOS)
Minimum 5 to 7 years of experience in same position in Petrochemical Plant, Responsible for condition monitoring, reliability and performance evaluation aspect of the rotating Machine Trains (Driver & driven) ofassigned plants. Regular management and ensures availability of software alarms, machinery information, base lines data, start-up/shutdown data for critical machines and historical data in online and offline machinery management systems.
2. ROTATING EQUIPMENT ENGINEER (15 NOS)
Minimum BS in Mechanical Engineering or equivalent. 5 to 7 years experience in Mechanical Engineering, including Rotating Equipment maintenance, condition monitoring in a Refinery, Power or ProcessPlants. Maintenance and corrective procedure of rotating and associated equipment specifically Centrifugal Compressors.
3. CONDITION MONITORING TECHNICIAN (15 NOS)
Minimum of 3 years in the field of Condition Monitoring in the Petrochemical, Refinery & Oil and Gas Plants. Carry out Condition Monitoring of the Plant Installed Rotating Equipments by Data Acquisition Techniques and Data Analysis. Carry out daily inspection, predictive maintenance and data collection on rotating machinery such as compressors, pumps, fans, blowers, gearboxes, motors, steam and gasturbines and turbo expanders.
4. ONLINE ANALYZER TECHNICIAN (10 NOS)
Minimum 7 years of experience in Electronics or Instrumentation fault diagnosis, breakdown repair, preventive maintenance and overhaul work, including at least 5 years Analyzer experience in Petrochemical or Oil Industry. Monitors physical inspection of process analyzers in all plant units. Must have knowledge for the following online analyzers, Yokogawa, Siemens GC, Oxygen, Infrared, NOX, TOC, IR & UV, Specific Gravity, Silica, Chlorine, PH and Conductivity Analyzers.
5. INSTRUMENT ENGINEERS (10 NOS)
6. INSTRUMENT TECHNICIAN (15 NOS)
7. MECHANICAL ENGINEERS (10 NOS)
8. MECHANICAL TECHNICIAN (15 NOS)
9. ELECTRICAL ENGINEERS (10 NOS)
10. ELECTRICAL TECHNICIAN (15 NOS)
Terms & Conditions:
a. Salary
- Engineer : SR 8000 (minimum, negotiable) + 25% of Basic Salary accommodation allowance + 10% of Basic Salary for transportation.
- Technician : SR 3500 - 5500
b. Contract : 2 yrs
c. Working hours / Day: 8 hours / 6 days.
d. Over Time : As per local law
e. Food : Provided Free
f. Accommodation : Provided Free
g. Medication : Provided
h. Leave : 30 days after 12 months (Paid)
i. Air ticket : Provided (Return)
If you feel you are match with above positions, you are welcome to send CV, in MS Word, not more than 300kb to
arthur@totaldata.co.id
Please put position desired in your email subject. We are sorry, only shortlist candidates will be notified.
For more info's, please call us at:
PT. Totaldata Persada
021-8477689, 021-84994728.
Attn.: Ms. Dika/Ms. Eva
Pengumuman CPNS BMKG 2009
PENGUMUMAN NO. KP 101/A.6/RO.II/ BMKG-09
Badan Meteorologi, Klimatologi dan Geofisika (BMKG) adalah Lembaga Pemerintahan Non Departemen yang bertugas melaksanakan tugas pemerintahan di bidang Meteorologi, Klimatologi, Kualitas Udara dan Geofisika.
Berdasarkan Keputusan Menteri Pendayagunaan Aparatur Negara Nomor : 558.F/M.PAN/ 7/2009 tanggal 10 Juli 2009
BMKG pada Tahun Anggaran 2009 membuka kesempatan bagi putra putri terbaik Bangsa untuk menjadi Pegawai BMKG melalui Penerimaan Calon Pegawai Negeri Sipil Golongan III dan Golongan II
A. JUMLAH YANG DIBUTUHKAN (FORMASI)
NO NAMA JABATAN KUALIFIKASI PENDIDIKAN JUMLAH PENEMPATAN
1. Pengamat Meteorologi dan Geofisika Pertama
§ D.III Meteorologi 54 UPT BMKG
§ D.III Geofisika 38 UPT BMKG
§ D.I Meteorologi 87 UPT BMKG
§ D.I Geofisika 24 UPT BMKG
§ D.III Komputer 13 UPT BMKG
§ S.1 Meteorologi 4 BMKG Pusat
§ S.1 Geofisika 2 BMKG Pusat
§ S.1 Teknik Elektro 1 BMKG Pusat
2. Verifikatur Keuangan
§ D.III Ekonomi 20 UPT BMKG
3. Penata Laporan Keuangan
§ S.1 Ekonomi 21 UPT BMKG
§ S.1 Ekonomi 4 BMKG Pusat
4. Ahli Gizi
§ S.1 Gizi 1 BMKG Pusat
5. Dokter Umum
§ Dokter Umum 1 BMKG Pusat
6. Analis Kepegawaian
§ S.1 Adm Negara/Mng/Mng SDM 6 BMKG Pusat
§ S.1 Psikologi 2 AMKG
7. Pengawas Bangunan
§ S.1 Arsitek/T. Sipil 1 BMKG Pusat
8. Pengawas Teknik Mesin
§ S.1 Teknik Mesin 1 BMKG Pusat
9. Pranata Komputer
§ D.III Teknik Komputer 2 BMKG Pusat
§ S.1 Teknik Informatika 2 BMKG Pusat
10. Perencana
§ S.1 Ekonomi 5 BMKG Pusat
11. Perencana Bangunan
§ S.1 T. Sipil / Arsitek 2 BMKG Pusat
12. Pranata Komputer
§ S.1 Teknik Informatika 3 BMKG Pusat
13. Perancang Peraturan Perundang-Undangan
§ S.1 Hukum 5 BMKG Pusat
14. Pranata Humas
§ S.1 Komunikasi 2 BMKG Pusat
15. Penyusun Bahan Kerjasama Luar Negeri
§ S.1 Hub. Internasional 4 BMKG Pusat
16. Petugas Lab. Bahasa
§ S.1 Bahasa Inggris 1 AMKG
B. KETENTUAN MELAMAR
1. Warga Negara Indonesia
2. Usia :
§ - minimal 18 tahun pada tanggal 1 Desember 2009
§ - maksimum 35 tahun pada tanggal 1 Desember 2009
3. Tidak pernah dihukum penjara berdasarkan putusan Pengadilan Negeri yang mempunyai kekuatan hukum tetap, dibuktikan dengan Surat Keterangan Catatan Kepolisian.
4. Memiliki kartu pencari kerja (Kartu Kuning) yang dikeluarkan oleh Dinas Tenaga Kerja.
5. Berbadan sehat, dibuktikan dengan Surat Keterangan Sehat Jasmani dan Rohani yang dikeluarkan oleh Dokter Pemerintah.
6. Tidak berkedudukan sebagai CPNS/PNS/Calon anggota TNI/POLRI serta anggota TNI/POLRI
7. Memiliki surat tanda lulus PTT bagi pelamar Kualifikasi Kedokteran Umum.
8. Bersedia ditempatkan di seluruh UPT BMKG di seluruh wilayah NKRI sesuai formasi yang ada.
C. KETENTUAN PENDAFTARAN
1. Penerimaan Surat Lamaran
§ Pendaftaran dibuka pada hari kerja mulai tanggal 14 September sampai dengan 5 Oktober 2009 secara serentak di lokasi pendaftaran
§ Surat Lamaran ditulis tangan dengan tinta hitam dan ditandatangani sendiri oleh pelamar ditujukan kepada
Kepala Badan Meteorologi, Klimatologi dan Geofisika
Jl. Angkasa I No. 2 Kemayoran, Jakarta Pusat.
§ Berkas Lamaran diajukan sendiri oleh peserta di tempat Lokasi Pendaftaran dengan mengisi Formulir Pendaftaran dan menerima Nomor Peserta Seleksi.
§ Bagi yang pernah mengajukan lamaran ke BMKG, agar mengulangi lamarannya sesuai dengan persyaratan dalam pengumuman ini.
§ Dalam lamaran harus menyebutkan jabatan yang dilamar.
2. Surat Lamaran Dilengkapi dengan :
1. Pas Photo terbaru berwarna dengan ukuran 3×4 sebanyak 3 lembar (cantumkan nama dibelakang).
2. Foto copy KTP yang masih berlaku.
3. Foto copy ijazah S.1/ D III / D I sesuai dengan kualifikasi pendidikan yang dibutuhkan dan berikut transkrip yang sudah dilegalisir oleh Dekan/ Ketua Sekolah Tinggi dari Perguruan Tinggi yang terakreditasi
4. Foto copy Kartu Tanda Pencari Kerja (Kartu Kuning) yang masih berlaku dari instansi Tenaga Kerja
5. Surat Keterangan Sehat Jasmani dan Rohani yang dikeluarkan oleh Dokter Pemerintah
6. Surat Pernyataan yang telah diisi dan ditandatangani di atas materai seperti terlampir
3. Surat lamaran beserta lampiran disusun rapih dan disatukan dengan penjepit sesuai urutan ketentuan butir 2 di dalam map Warna Kuning untuk S.1, warna hijau untuk D.III dan warna merah untuk D.I dengan mencantumkan jurusan pendidikan dan nama jabatan yang di lamar pada sudut kiri atas map.
D. TAHAPAN DAN JADWAL SELEKSI
Seleksi dilakukan secara bertahap dengan sistem gugur sebagai berikut :
1. Seleksi Administrasi pada saat pendaftaran
2. Seleksi Akademik terdiri dari materi:
1. TKD (Tes Kompetensi Dasar) :
§ TPU (Tes Pengetahuan Umum)
§ TBS (Tes Bakat Skolastik) dan;
2. TKB (Tes Kompetensi Bidang)/ Subtantif
§ TSK (Tes Skala Kematangan)
3. Lokasi pelaksanaan seleksi dapat dilihat di tempat pendaftaran dan website BMKG.
(http://www.BMKG. go.id )
4. Keputusan panitia bersifat final dan tidak dapat diganggu gugat.
E. LAIN-LAIN
1. Nama peserta yang lulus seleksi akademik akan diumumkan melalui website BMKG (http://www.BMKG. go.id) dan papan pengumuman di lokasi seleksi.
2. Seleksi masuk CPNS BMKG tidak dipungut biaya.
3. Peserta yang dinyatakan lulus seleksi wajib menunjukkan ijazah asli pendidikan terakhir untuk diperiksa, dan menyerahkan dokumen asli berupa SKCK dan surat keterangan bebas narkoba dari Dokter Pemerintah.
Dokumen tersebut harus dibuat setelah tanggal 1 Oktober 2009
4. Lokasi Pendaftaran dan Seleksi dapat dilihat dalam Lampiran.
5. Bagi mereka yang dinyatakan lulus seluruh tahapan seleksi tetapi mengundurkan diri, wajib mengganti biaya yang telah dikeluarkan sebesar Rp. 10.000.000,- (sepuluh juta rupiah)
ttd bmg <http://jobsengineer .kuchika. com/wp-content/ uploads/2009/ 09/ttd-bmg. jpg>
LEBIH LANJUT PERSYARATAN DOWNLOAD FORM BMG
<http://www.bmg. go.id/share/ Dokumen/lokasi% 20dftr%20+ %20tes.pdf>
LOKASI PENDAFTARAN DAN SELEKSI CPNS BMKG TAHUN 2009
<http://www.bmg. go.id/share/ Dokumen/pengumum an%20penerimaan% 20cpns%202009. pdf>
Badan Meteorologi, Klimatologi dan Geofisika (BMKG) adalah Lembaga Pemerintahan Non Departemen yang bertugas melaksanakan tugas pemerintahan di bidang Meteorologi, Klimatologi, Kualitas Udara dan Geofisika.
Berdasarkan Keputusan Menteri Pendayagunaan Aparatur Negara Nomor : 558.F/M.PAN/ 7/2009 tanggal 10 Juli 2009
BMKG pada Tahun Anggaran 2009 membuka kesempatan bagi putra putri terbaik Bangsa untuk menjadi Pegawai BMKG melalui Penerimaan Calon Pegawai Negeri Sipil Golongan III dan Golongan II
A. JUMLAH YANG DIBUTUHKAN (FORMASI)
NO NAMA JABATAN KUALIFIKASI PENDIDIKAN JUMLAH PENEMPATAN
1. Pengamat Meteorologi dan Geofisika Pertama
§ D.III Meteorologi 54 UPT BMKG
§ D.III Geofisika 38 UPT BMKG
§ D.I Meteorologi 87 UPT BMKG
§ D.I Geofisika 24 UPT BMKG
§ D.III Komputer 13 UPT BMKG
§ S.1 Meteorologi 4 BMKG Pusat
§ S.1 Geofisika 2 BMKG Pusat
§ S.1 Teknik Elektro 1 BMKG Pusat
2. Verifikatur Keuangan
§ D.III Ekonomi 20 UPT BMKG
3. Penata Laporan Keuangan
§ S.1 Ekonomi 21 UPT BMKG
§ S.1 Ekonomi 4 BMKG Pusat
4. Ahli Gizi
§ S.1 Gizi 1 BMKG Pusat
5. Dokter Umum
§ Dokter Umum 1 BMKG Pusat
6. Analis Kepegawaian
§ S.1 Adm Negara/Mng/Mng SDM 6 BMKG Pusat
§ S.1 Psikologi 2 AMKG
7. Pengawas Bangunan
§ S.1 Arsitek/T. Sipil 1 BMKG Pusat
8. Pengawas Teknik Mesin
§ S.1 Teknik Mesin 1 BMKG Pusat
9. Pranata Komputer
§ D.III Teknik Komputer 2 BMKG Pusat
§ S.1 Teknik Informatika 2 BMKG Pusat
10. Perencana
§ S.1 Ekonomi 5 BMKG Pusat
11. Perencana Bangunan
§ S.1 T. Sipil / Arsitek 2 BMKG Pusat
12. Pranata Komputer
§ S.1 Teknik Informatika 3 BMKG Pusat
13. Perancang Peraturan Perundang-Undangan
§ S.1 Hukum 5 BMKG Pusat
14. Pranata Humas
§ S.1 Komunikasi 2 BMKG Pusat
15. Penyusun Bahan Kerjasama Luar Negeri
§ S.1 Hub. Internasional 4 BMKG Pusat
16. Petugas Lab. Bahasa
§ S.1 Bahasa Inggris 1 AMKG
B. KETENTUAN MELAMAR
1. Warga Negara Indonesia
2. Usia :
§ - minimal 18 tahun pada tanggal 1 Desember 2009
§ - maksimum 35 tahun pada tanggal 1 Desember 2009
3. Tidak pernah dihukum penjara berdasarkan putusan Pengadilan Negeri yang mempunyai kekuatan hukum tetap, dibuktikan dengan Surat Keterangan Catatan Kepolisian.
4. Memiliki kartu pencari kerja (Kartu Kuning) yang dikeluarkan oleh Dinas Tenaga Kerja.
5. Berbadan sehat, dibuktikan dengan Surat Keterangan Sehat Jasmani dan Rohani yang dikeluarkan oleh Dokter Pemerintah.
6. Tidak berkedudukan sebagai CPNS/PNS/Calon anggota TNI/POLRI serta anggota TNI/POLRI
7. Memiliki surat tanda lulus PTT bagi pelamar Kualifikasi Kedokteran Umum.
8. Bersedia ditempatkan di seluruh UPT BMKG di seluruh wilayah NKRI sesuai formasi yang ada.
C. KETENTUAN PENDAFTARAN
1. Penerimaan Surat Lamaran
§ Pendaftaran dibuka pada hari kerja mulai tanggal 14 September sampai dengan 5 Oktober 2009 secara serentak di lokasi pendaftaran
§ Surat Lamaran ditulis tangan dengan tinta hitam dan ditandatangani sendiri oleh pelamar ditujukan kepada
Kepala Badan Meteorologi, Klimatologi dan Geofisika
Jl. Angkasa I No. 2 Kemayoran, Jakarta Pusat.
§ Berkas Lamaran diajukan sendiri oleh peserta di tempat Lokasi Pendaftaran dengan mengisi Formulir Pendaftaran dan menerima Nomor Peserta Seleksi.
§ Bagi yang pernah mengajukan lamaran ke BMKG, agar mengulangi lamarannya sesuai dengan persyaratan dalam pengumuman ini.
§ Dalam lamaran harus menyebutkan jabatan yang dilamar.
2. Surat Lamaran Dilengkapi dengan :
1. Pas Photo terbaru berwarna dengan ukuran 3×4 sebanyak 3 lembar (cantumkan nama dibelakang).
2. Foto copy KTP yang masih berlaku.
3. Foto copy ijazah S.1/ D III / D I sesuai dengan kualifikasi pendidikan yang dibutuhkan dan berikut transkrip yang sudah dilegalisir oleh Dekan/ Ketua Sekolah Tinggi dari Perguruan Tinggi yang terakreditasi
4. Foto copy Kartu Tanda Pencari Kerja (Kartu Kuning) yang masih berlaku dari instansi Tenaga Kerja
5. Surat Keterangan Sehat Jasmani dan Rohani yang dikeluarkan oleh Dokter Pemerintah
6. Surat Pernyataan yang telah diisi dan ditandatangani di atas materai seperti terlampir
3. Surat lamaran beserta lampiran disusun rapih dan disatukan dengan penjepit sesuai urutan ketentuan butir 2 di dalam map Warna Kuning untuk S.1, warna hijau untuk D.III dan warna merah untuk D.I dengan mencantumkan jurusan pendidikan dan nama jabatan yang di lamar pada sudut kiri atas map.
D. TAHAPAN DAN JADWAL SELEKSI
Seleksi dilakukan secara bertahap dengan sistem gugur sebagai berikut :
1. Seleksi Administrasi pada saat pendaftaran
2. Seleksi Akademik terdiri dari materi:
1. TKD (Tes Kompetensi Dasar) :
§ TPU (Tes Pengetahuan Umum)
§ TBS (Tes Bakat Skolastik) dan;
2. TKB (Tes Kompetensi Bidang)/ Subtantif
§ TSK (Tes Skala Kematangan)
3. Lokasi pelaksanaan seleksi dapat dilihat di tempat pendaftaran dan website BMKG.
(http://www.BMKG. go.id )
4. Keputusan panitia bersifat final dan tidak dapat diganggu gugat.
E. LAIN-LAIN
1. Nama peserta yang lulus seleksi akademik akan diumumkan melalui website BMKG (http://www.BMKG. go.id) dan papan pengumuman di lokasi seleksi.
2. Seleksi masuk CPNS BMKG tidak dipungut biaya.
3. Peserta yang dinyatakan lulus seleksi wajib menunjukkan ijazah asli pendidikan terakhir untuk diperiksa, dan menyerahkan dokumen asli berupa SKCK dan surat keterangan bebas narkoba dari Dokter Pemerintah.
Dokumen tersebut harus dibuat setelah tanggal 1 Oktober 2009
4. Lokasi Pendaftaran dan Seleksi dapat dilihat dalam Lampiran.
5. Bagi mereka yang dinyatakan lulus seluruh tahapan seleksi tetapi mengundurkan diri, wajib mengganti biaya yang telah dikeluarkan sebesar Rp. 10.000.000,- (sepuluh juta rupiah)
ttd bmg <http://jobsengineer .kuchika. com/wp-content/ uploads/2009/ 09/ttd-bmg. jpg>
LEBIH LANJUT PERSYARATAN DOWNLOAD FORM BMG
<http://www.bmg. go.id/share/ Dokumen/lokasi% 20dftr%20+ %20tes.pdf>
LOKASI PENDAFTARAN DAN SELEKSI CPNS BMKG TAHUN 2009
<http://www.bmg. go.id/share/ Dokumen/pengumum an%20penerimaan% 20cpns%202009. pdf>
MEKANIK ALAT BERAT
Dear Moderator, mohon ijin untuk posting info lowongan berikut :
Sebuah perusahaan penanaman modal asing (PMA) yang sedang berkembang pesat dan bergerak di bidang alat-alat berat sedang mencari pribadi yang muda, dinamis, dan bermotivasi tinggi untuk mengisi posisi sebagai berikut :
MEKANIK ALAT BERAT :
Kualifikasi :
1. Pria, single maks 25 tahun
2. Pendidikan minimal SMK/STM mekanik atau otomotif
3. Pengalaman min. 1 tahun menjadi alat berat
4. Bersedia ditempatkan pada salah satu cabang di seluruh Indonesia
Silahkan kirimkan resume lengkap (cv, dokumen pendukung, dan pasfoto terbaru) ke
PT. Daya Kobelco Construction Machinery Indonesia
Wisma Pondok Indah 2 (12th suite floor)
Jl. Sultan Iskandar Muda Kav V-TA
Jakarta 12310
atau email ke:
recruitment@ dayakobelco. co.id
(paling lambat 2 minggu setelah publikasi email ini)
Sebuah perusahaan penanaman modal asing (PMA) yang sedang berkembang pesat dan bergerak di bidang alat-alat berat sedang mencari pribadi yang muda, dinamis, dan bermotivasi tinggi untuk mengisi posisi sebagai berikut :
MEKANIK ALAT BERAT :
Kualifikasi :
1. Pria, single maks 25 tahun
2. Pendidikan minimal SMK/STM mekanik atau otomotif
3. Pengalaman min. 1 tahun menjadi alat berat
4. Bersedia ditempatkan pada salah satu cabang di seluruh Indonesia
Silahkan kirimkan resume lengkap (cv, dokumen pendukung, dan pasfoto terbaru) ke
PT. Daya Kobelco Construction Machinery Indonesia
Wisma Pondok Indah 2 (12th suite floor)
Jl. Sultan Iskandar Muda Kav V-TA
Jakarta 12310
atau email ke:
recruitment@ dayakobelco. co.id
(paling lambat 2 minggu setelah publikasi email ini)
Engineering Supervisor
Advertised: 11-9-09 Closing Date: 10-10-09
Perusahaan manufaktur consumer goods berskala nasional yang berlokasi di kota Surabaya membuka kesempatan bagi Anda untuk bergabung menduduki posisi :
Engineering Supervisor
(Jawa Timur - Surabaya)
Requirements:
- Pria
- Usia maksimal 40 tahun
- Pendidikan minimum S1 Teknik Mesin / S1 Teknik Elektro
- Pengalaman minimal 3 tahun
- Menguasai mesin Hidrolik dan Pneumatik
- Bersedia untuk mengikuti keseluruhan proses seleksi kerja di Surabaya dengan akomodasi sendiri bagi pelamar yang domisilinya di luar kota Surabaya
- Untuk penempatan di Surabaya
For registered JobStreet.com users, to apply online or via sms JSA(spasi)APPLY(spasi)JobCode Send to 9333
http://id.jobstreet.com/jobs/2009/9/default/40/88837.htm?fr=L
Thursday, September 10, 2009
Sparepart Manager
PT AMX Motor
Advertised: 10-9-09 Closing Date: 9-10-09
Sparepart Manager
(Jakarta Raya)
Requirements:
- Pria/Wanita
- Usia maksimal 35 tahun
- Minimal pendidikan S1
- Minimal 5 tahun pengalaman di bidang yang sama
- Akan bertanggung jawab dalam segala aspek di kategori Sparepart
- Independen, aktif, kreatif, integritas tinggi, komunikatif, tangguh di bawah tekanan dan deadline
- Mampu berbahasa Inggris secara pasif dan aktif
Kirimkan resume lengkap ke:
hrd@amxmotor.com
or apply via Jobstreet:
http://id.jobstreet.com/jobs/2009/9/default/40/89180.htm?fr=L
Advertised: 10-9-09 Closing Date: 9-10-09
Sparepart Manager
(Jakarta Raya)
Requirements:
- Pria/Wanita
- Usia maksimal 35 tahun
- Minimal pendidikan S1
- Minimal 5 tahun pengalaman di bidang yang sama
- Akan bertanggung jawab dalam segala aspek di kategori Sparepart
- Independen, aktif, kreatif, integritas tinggi, komunikatif, tangguh di bawah tekanan dan deadline
- Mampu berbahasa Inggris secara pasif dan aktif
Kirimkan resume lengkap ke:
hrd@amxmotor.com
or apply via Jobstreet:
http://id.jobstreet.com/jobs/2009/9/default/40/89180.htm?fr=L
Wednesday, September 9, 2009
Mechanical Design Engineer
Mechanical Design Engineer
(Jawa Tengah)
Requirements:
- Candidate must possess at least a Bachelor's Degree, Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
- Required language(s): English
- At least 3 - 5 year(s) of working experience in Mechanical Design Engineering tasks.
- Must have good knowledge and skills in mechanical design tools, such as: AutoCAD 3D, Pro Eng, CATIA, Solid Works, etc.
- Preferably Coordinator/Supervisors specializing in Engineering - Mechanical/Automotive or equivalent.
- Willing to placed at Salatiga area
- Full-Time positions available.
We treat our Candidate resumes in a professional manner and strictly confidential, as our code of ethic. If you meet the above requirements and interested with the position, please email in MS Word format or send your CV to:
PT JAC Indonesia
Menara Cakrawala (Skyline Building) - 19th Floor
Jl. MH. Thamrin No. 9 - Jakarta 10340
Telp: (021) 315 9504 / 06
Email:
hendra@jac-recruitment.co.id
dewi@jac-recruitement.co.id
or apply via Jobstreet:
http://id.jobstreet.com/jobs/2009/8/default/40/87880.htm?fr=L
(Jawa Tengah)
Requirements:
- Candidate must possess at least a Bachelor's Degree, Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
- Required language(s): English
- At least 3 - 5 year(s) of working experience in Mechanical Design Engineering tasks.
- Must have good knowledge and skills in mechanical design tools, such as: AutoCAD 3D, Pro Eng, CATIA, Solid Works, etc.
- Preferably Coordinator/Supervisors specializing in Engineering - Mechanical/Automotive or equivalent.
- Willing to placed at Salatiga area
- Full-Time positions available.
We treat our Candidate resumes in a professional manner and strictly confidential, as our code of ethic. If you meet the above requirements and interested with the position, please email in MS Word format or send your CV to:
PT JAC Indonesia
Menara Cakrawala (Skyline Building) - 19th Floor
Jl. MH. Thamrin No. 9 - Jakarta 10340
Telp: (021) 315 9504 / 06
Email:
hendra@jac-recruitment.co.id
dewi@jac-recruitement.co.id
or apply via Jobstreet:
http://id.jobstreet.com/jobs/2009/8/default/40/87880.htm?fr=L
Tuesday, September 8, 2009
PT. PROSYS BANGUN PERSADA - Various
PT. PROSYS BANGUN PERSADA is a leading Project Management Consultant in Oil & Gas, Infrastructure, Finance & Banking, Telecommunication, Construction and Properties is growing very fast in Engineering, Procurement, and Construction area, currently searching for highly qualified candidate for the following position:
1. Team Leader
Kualifikasi:
- S1 Arsitek atau Tehnik Sipil dari Universitas ternama
- Memiliki pengalaman kerja sebagai Construction Manager minimal 5 kali.
- Memiliki pengalaman sebagai Team Leader Construction Management pada pembangunan gedung minimal 15 tahun dalam mereview perencanaan dan pengawasan pelaksanaan konstruksi pembangunan bandara
- Memiliki sertifikat Keahlian Bidang Management Konstruksi yang diterbitkan dan disahkan Asosiasi Profesi (dikirimkan fotocopy bersama CV).
2. Field Coordinator
Kualifikasi:
- S1 Arsitek atau Tehnik Sipil dari Universitas Ternama
- Memiliki pengalaman sebagai Field Coordinator minimal 9 tahun pada pekerjaan konstruksi pembangunan Bandara
- Memiliki sertifikat Keahlian Bidang Management Konstruksi yang diterbitkan dan disahkan Asosiasi Profesi . (dikirimkan fotocopy bersama CV).
3. Tenaga Ahli Sipil (Struktur & Jalan Raya) dan Field Civil Supervisor
Kualifikasi:
- S1 Tehnik Sipil dari Universitas Ternama
- Berpengalaman sebagai Civil Engineer minimal 9 tahun dan minimal 5 tahun (Field Supervisor) pada review perencanaan dan pengawasan pelaksanaan konstruksi pembangunan bandara.
4. Tenaga Ahli Arsitektur dan Field Architect Supervisor
Kualifikasi:
- S1 Tehnik Arsitek dari Universitas Ternama
- Berpengalaman sebagai Engineer minimal 9 tahun minimal 5 tahun (Field Supervisor) pada review perencanaan dan pengawasan pelaksanaan konstruksi pembangunan bandara.
5. Tenaga Ahli Mekanikal dan Field Mechanical Supervisor
Kualifikasi:
- S1 Tehnik Mekanikal dari Universitas Ternama
- Berpengalaman sebagai Engineer minimal 9 tahun minimal 5 tahun (Field Supervisor) pada review perencanaan dan pengawasan pelaksanaan konstruksi pembangunan bandara.
6. Tenaga Ahli Elektrikal dan Field Electrical Supervisor
Kualifikasi:
- S1 Tehnik Elektrikal dari Universitas Ternama
- Berpengalaman sebagai Engineer minimal 9 tahun minimal 5 tahun (Field Supervisor) pada review perencanaan dan pengawasan pelaksanaan konstruksi pembangunan bandara.
7. Tenaga Ahli Elektronika dan Field Electronical Supervisor
Kualifikasi:
- S1 Tehnik Elektrikal dari Universitas Ternama
- Berpengalaman sebagai Engineer minimal 9 tahun minimal 5 tahun (Field Supervisor) pada review perencanaan dan pengawasan pelaksanaan konstruksi pembangunan bandara.
8. Quantity Surveyor dan Ass Quality Material Surveyor
- S1 Tehnik Sipil dari Universitas Ternama
- Berpengalaman sebagai Quantity Surveyor minimal 9 tahun (QS) dan minimal 5 tahun (Assisten) pada review perencanaan dan pengawasan pelaksanaan konstruksi pembangunan bandara.
9. Koordinator K3 (Keselamatan Kerja Konstruksi)
Kualifikasi:
- S1 Tehnik Sipil dari Universitas Ternama
- Berpengalaman sebagai Koordinator K3 minimal 9 tahun dalam mengkoordinasikan kegiatan pelaksanaan K3 pembangunan bandara.
10. Asisten Ahli Geodesi
Kualifikasi:
- S1 Tehnik Geodesi dari Universitas Ternama
- Berpengalaman minimal 5 tahun sebagai Ahli Geodesi pada proyek pembanguna Bandara
11. Office Manager & Document Specialist
Kualifikasi:
- S1 Hukum dari Universitas Ternama
- Berpengalaman sebagai Document Spesialist minimal 9 tahun pada mereview dan membuat kontrak kerja
Bila anda sesuai dengan Kualifikasi yang kami butuhkan, silahkan kirimkan CV anda ke
recruitment@prosys.co.id
Note :
Mohon Cantumkan ekspektasi / gaji yang diharapkan dan gaji anda saat ini.
1. Team Leader
Kualifikasi:
- S1 Arsitek atau Tehnik Sipil dari Universitas ternama
- Memiliki pengalaman kerja sebagai Construction Manager minimal 5 kali.
- Memiliki pengalaman sebagai Team Leader Construction Management pada pembangunan gedung minimal 15 tahun dalam mereview perencanaan dan pengawasan pelaksanaan konstruksi pembangunan bandara
- Memiliki sertifikat Keahlian Bidang Management Konstruksi yang diterbitkan dan disahkan Asosiasi Profesi (dikirimkan fotocopy bersama CV).
2. Field Coordinator
Kualifikasi:
- S1 Arsitek atau Tehnik Sipil dari Universitas Ternama
- Memiliki pengalaman sebagai Field Coordinator minimal 9 tahun pada pekerjaan konstruksi pembangunan Bandara
- Memiliki sertifikat Keahlian Bidang Management Konstruksi yang diterbitkan dan disahkan Asosiasi Profesi . (dikirimkan fotocopy bersama CV).
3. Tenaga Ahli Sipil (Struktur & Jalan Raya) dan Field Civil Supervisor
Kualifikasi:
- S1 Tehnik Sipil dari Universitas Ternama
- Berpengalaman sebagai Civil Engineer minimal 9 tahun dan minimal 5 tahun (Field Supervisor) pada review perencanaan dan pengawasan pelaksanaan konstruksi pembangunan bandara.
4. Tenaga Ahli Arsitektur dan Field Architect Supervisor
Kualifikasi:
- S1 Tehnik Arsitek dari Universitas Ternama
- Berpengalaman sebagai Engineer minimal 9 tahun minimal 5 tahun (Field Supervisor) pada review perencanaan dan pengawasan pelaksanaan konstruksi pembangunan bandara.
5. Tenaga Ahli Mekanikal dan Field Mechanical Supervisor
Kualifikasi:
- S1 Tehnik Mekanikal dari Universitas Ternama
- Berpengalaman sebagai Engineer minimal 9 tahun minimal 5 tahun (Field Supervisor) pada review perencanaan dan pengawasan pelaksanaan konstruksi pembangunan bandara.
6. Tenaga Ahli Elektrikal dan Field Electrical Supervisor
Kualifikasi:
- S1 Tehnik Elektrikal dari Universitas Ternama
- Berpengalaman sebagai Engineer minimal 9 tahun minimal 5 tahun (Field Supervisor) pada review perencanaan dan pengawasan pelaksanaan konstruksi pembangunan bandara.
7. Tenaga Ahli Elektronika dan Field Electronical Supervisor
Kualifikasi:
- S1 Tehnik Elektrikal dari Universitas Ternama
- Berpengalaman sebagai Engineer minimal 9 tahun minimal 5 tahun (Field Supervisor) pada review perencanaan dan pengawasan pelaksanaan konstruksi pembangunan bandara.
8. Quantity Surveyor dan Ass Quality Material Surveyor
- S1 Tehnik Sipil dari Universitas Ternama
- Berpengalaman sebagai Quantity Surveyor minimal 9 tahun (QS) dan minimal 5 tahun (Assisten) pada review perencanaan dan pengawasan pelaksanaan konstruksi pembangunan bandara.
9. Koordinator K3 (Keselamatan Kerja Konstruksi)
Kualifikasi:
- S1 Tehnik Sipil dari Universitas Ternama
- Berpengalaman sebagai Koordinator K3 minimal 9 tahun dalam mengkoordinasikan kegiatan pelaksanaan K3 pembangunan bandara.
10. Asisten Ahli Geodesi
Kualifikasi:
- S1 Tehnik Geodesi dari Universitas Ternama
- Berpengalaman minimal 5 tahun sebagai Ahli Geodesi pada proyek pembanguna Bandara
11. Office Manager & Document Specialist
Kualifikasi:
- S1 Hukum dari Universitas Ternama
- Berpengalaman sebagai Document Spesialist minimal 9 tahun pada mereview dan membuat kontrak kerja
Bila anda sesuai dengan Kualifikasi yang kami butuhkan, silahkan kirimkan CV anda ke
recruitment@prosys.co.id
Note :
Mohon Cantumkan ekspektasi / gaji yang diharapkan dan gaji anda saat ini.
PURCHASING SUPERVISOR (PROC)
We, one of the fastest growing pharmaceutical companies, are looking for a highly qualified and dynamic professionals to answer the challenge of developing and growing together as:
PURCHASING SUPERVISOR (PROC)
- Male. Max 35 years old
- Hold Bachelor's Degree in Engineering (Mechanical or Electrical)
- Min 3 years experience in Purchasing especially in handling Machine or Spare Part.
- Experience as Coordinator or Supervisor and able to speak Mandarin will be an advantage
Please send your application with CV, a recent photograph, copy ID card,copy of certificate and academic transcript and kindly mark position code on the top of the envelope, not later than 2 weeks after this advertisement to PT. SOHO Industri Pharmasi via email to:
soho.recruitment@gmail.com
PURCHASING SUPERVISOR (PROC)
- Male. Max 35 years old
- Hold Bachelor's Degree in Engineering (Mechanical or Electrical)
- Min 3 years experience in Purchasing especially in handling Machine or Spare Part.
- Experience as Coordinator or Supervisor and able to speak Mandarin will be an advantage
Please send your application with CV, a recent photograph, copy ID card,copy of certificate and academic transcript and kindly mark position code on the top of the envelope, not later than 2 weeks after this advertisement to PT. SOHO Industri Pharmasi via email to:
soho.recruitment@gmail.com
Dubai Electricity & Water Authority (DEWA) - Various
We PT Millenium Muda Mandiri is a recruitment and consulting company that specializes in placement of Indonesian skilled workers in Hospitality (Hotel, Cruise Line & Restaurant), Healthcare & Medical,Oil & Gas, Construction, and Retail Industry through out the Gulf region, Far East Asia, Europe and still expanding fast to other parts of the world.
Our Client from Dubai Electricity & Water Authority (DEWA) is looking for Professional Candidates Engineer to fill the following vacancies in Dubai:
1. Manager Electrical Maintenance
QUALIFICATIONS:
· Post Graduate / Graduate in Electrical Engineering, max. graduated on 1994· Minimum 15 years experience in maintenance of electrical equipment in an electrical power plant / industry for a graduate and 8 years for a post graduate, of which at least 4 years should be in a similar responsible position.
· Shall be responsible for proactive & reliability centered maintenance of electrical equipment and systems installed in a modern GT/ST power and desalination plant.
· Should be able to plan & schedule all maintenance activities with cost effective inventory management and prepare & control budgetary provisions.
· Good co-coordinating, organizing, planning & communication skills are required.
· Should have in depth knowledge of all electrical equipment of a power plant, sequence controls & protections and exposure to Quality, Safety & Environment Management Systems, Root Cause Analysis &computer-aided maintenance techniques.
2. Foreman- Electrical Maintenance
QUALIFICATIONS:
· Diploma in Electrical Engineering, max. graduated on 2002
· Minimum 7 years hands on experience in maintenance of electrical equipment in power stations or process industry.
· Shall be able to supervise, guide and execute routine, breakdown and overhaul maintenance jobs of electrical equipment like Generators, Transformers, LV/HV Motors, Switchgear, EOT Cranes, Batteries,Chargers & Inverters and etc. Knowledge of sequence controls, wiring, schematic drawings & safe work procedures is required.
3. Engineer/ Senior EngineerElectrical Maintenance
QUALIFICATIONS:
· Post Graduate / Graduate in Electrical Engineering, max. graduated on 1997
· Minimum 12 years experience in maintenance of electrical equipment in an electrical power plant / industry for a graduate and 8 years for a post graduate, of which at least 4 years should be in a similar responsible position.
· Shall be responsible for proactive & reliability centered maintenance of electrical equipment and systems installed in a modern GT/ST power and desalination plant.
· Should be able to plan & schedule all maintenance activities with cost effective inventory management and prepare & control budgetary provisions.
· Good co-coordinating, organizing, planning & communication skills are required.
· Should have in depth knowledge of all electrical equipment of a power plant, sequence controls & protections and exposure to Quality, Safety & Environment Management Systems, Root Cause Analysis &computer-aided maintenance techniques.
4. Assistant Engineer- Electrical Maintenance
QUALIFICATIONS:
· Post Graduate / Graduate in Electrical Engineering, max. graduated on 2004
· Minimum 5 years for graduate & 3 years for postgraduate candidate having experience of maintenance of electrical equipment in an electrical power plant or process industry.
· Shall be responsible for supervising reliability- centered maintenance of equipments like Generators, Transformers, HV & LV motors, switchgears, EOT Cranes, Batteries and Chargers & Inverters.
· Good co-coordinating and communication skills are required. A very good computer cognizance is preferred.
5. SENIOR POWER STATION OPERATOR
QUALIFICATIONS:
· Degree / Diploma in Engineering (Mech./Elect. /Power), max. graduated on 2006
· AGE Not more than 35 years
· Minimum 2 5 years experience in operation of a modern gas/thermal power & desalination station.
· The applicant shall be well versed in power / desalination plant operations through DCS system.
· Responsible for monitoring and operating the plant / equipment from the central control boards and optimize plant operation.
· Responsible for satisfactory operation of the assigned plant (Boiler, Turbine, Generator and Desalination Plant) with the appointed crew.
· Supervise, instruct and co-ordinate with the assigned crew efficiency and effectively fulfill their job functions and assignments.
· Check and review the operating conditions and records in order to investigate the weak and troublesome point in advance of any occurrence.
· Maintain the operating equipment and facilities in sound and clean condition.
· Maintain detailed operation logs for all operation activities.
· Carry out isolation of the equipment for planned and emergency maintenance and normalization of the plant thereafter.
· Follow safety rules and ensure close adherence to the safety, environment and quality requirements. Should be willing to work in shifts
6. POWER STATION OPERATOR
QUALIFICATIONS:
· Degree / Diploma in Engineering (Mech./Elect. /Power), max. graduated on 2006
· AGE Not more than 30 years
· Minimum 2 5 years experience in operation of a modern gas/thermal power & desalination station.
· The applicant shall be well versed in power / desalination plant operations through DCS system.
· Responsible for monitoring and operating the plant / equipment from the central control boards and optimize plant operation.
· Responsible for satisfactory operation of the assigned plant (Boiler, Turbine, Generator and Desalination Plant) with the appointed crew. Supervise, instruct and co-ordinate with the assigned crew efficiencyand effectively fulfill their job functions and assignments.
· Check and review the operating conditions and records in order to investigate the weak and troublesome point in advance of any occurrence.
· Maintain the operating equipment and facilities in sound and clean condition.
· Maintain detailed operation logs for all operation activities.
· Carry out isolation of the equipment for planned and emergency maintenance and normalization of the plant there after.
· Follow safety rules and ensure close adherence to the safety, environment and quality requirements. Should be willing to work in shifts.
7. SENIOR ENGINEER - I&C MAINT.
QUALIFICATIONS:
· B.Sc in Electrical / Electronics / Instrument Engineer, max. graduated on 2004
· 5 10 years experience in diagnostic check, troubleshooting and maintenance of instrumentation and control in Power plant.
· Through understanding of Control Loops.
· Field instruments and Control Actuator, Calibration and Maintenance, Knowledge and working experience on different control system such as DCS, PLC, Fire Fighting System.
· Practical experience in ABB PROCONTROL P-13 / P14 / PMS & POS, GE -Speedtronic Mark VI, ABB DCS INFI 90 / Symphony, Siemens DCS- Teleperm ME / Teleperm XP, Simadyn D Controller, Toshiba DCS TOSMAP, PLC SIAMTIC S5 / S7, CEGELEC PLC, Allen bardley PLC, HIMA PLC.
· Fire fighting and detection system Minimax / Simplex capability.
· Self motivated, ability to work under pressure, good supervisory and reporting correspondences.
· Awareness of personnel and equipment safety standard, Environmental protection standard and Quality management system.
8. ENGINEER - I&C MAINT.
QUALIFICATIONS:
· B.Sc in Electrical / Electronics / Instrument Engineer, max. graduated on 2004
· 5 10 years experience in diagnostic check, troubleshooting and maintenance of instrumentation and control in Power plant.
· Through understanding of Control Loops.
· Field instruments and Control Actuator, Calibration and Maintenance, Knowledge and working experience on different control system such as DCS, PLC, Fire Fighting System.
· Practical experience in ABB PROCONTROL P-13 / P14 / PMS & POS, GE -Speedtronic Mark VI, ABB DCS INFI 90 / Symphony, Siemens DCS- Teleperm ME / Teleperm XP, Simadyn D Controller, Toshiba DCS TOSMAP, PLC SIAMTIC S5 / S7, CEGELEC PLC, Allen bardley PLC, HIMA PLC.
· Fire fighting and detection system Minimax / Simplex capability.
· Self motivated, ability to work under pressure, good supervisory and reporting correspondences.
· Awareness of personnel and equipment safety standard, Environmental protection standard and Quality management system.
9. ASSISTANT ENGINEER - I&C MAINT.
QUALIFICATIONS:
· B.Sc in Electrical / Electronics / Instrument Engineer, max. graduated on 2004
· 5 10 years experience in diagnostic check, troubleshooting and maintenance of instrumentation and control in Power plant.
· Through understanding of Control Loops.
· Field instruments and Control Actuator, Calibration and Maintenance, Knowledge and working experience on different control system such as DCS, PLC, Fire Fighting System.
· Practical experience in ABB PROCONTROL P-13 / P14 / PMS & POS, GE -Speedtronic Mark VI, ABB DCS INFI 90 / Symphony, Siemens DCS- Teleperm ME / Teleperm XP, Simadyn D Controller, Toshiba DCS TOSMAP, PLC SIAMTIC S5 / S7, CEGELEC PLC, Allen bardley PLC, HIMA PLC. Fire fighting and detection system Minimax / Simplex capability.
· Self motivated, ability to work under pressure, good supervisory and reporting correspondences.
· Awareness of personnel and equipment safety standard, Environmental protection standard and Quality management system.
10. I&C FOREMAN
QUALIFICATIONS:
· Diploma in Electronics, Instrumentation & Control or Electrical Engineer, max. graduated on 2002
· Minimum 7 years experience in Power and Desalination Plant Instrumentation & Control System.
· Carry out of the repair and maintenance work of all types of field instruments such as temperature, pressure, level, vibration, speed, flame detectors, transmitters, switches, gauges, recorders andanalyzers.
· Calibration and maintenance of various types of control actuators e.g. Hydraulic, pneumatic and motorized control valves.
· Work experience of various types of workshop test equipment.
· Supervision ability and guidance of work crafts and reporting capability. Self motivated and can work under pressure.
· Should have awareness of personnel and equipment safety such as PLC, DCS and through understanding of control loops.
11. SR. Engineer Mechanical Maintenance (Steam Turbine)
QUALIFICATIONS:
· Diploma in Electronics, Instrumentation & Control or Electrical Engineer, max. graduated on 2002
· Minimum 7 years experience in Power and Desalination Plant Instrumentation & Control System.
· Carry out of the repair and maintenance work of all types of field instruments such as temperature, pressure, level, vibration, speed, flame detectors, transmitters, switches, gauges, recorders andanalyzers.
· Calibration and maintenance of various types of control actuators e.g. Hydraulic, pneumatic and motorized control valves.
· Work experience of various types of workshop test equipment.
· Supervision ability and guidance of work crafts and reporting capability. Self motivated and can work under pressure.
· Should have awareness of personnel and equipment safety such as PLC, DCS and through understanding of control loops.
12. Engineer Mechanical Maintenance (Steam Turbine)
QUALIFICATIONS
· Degree in Mechanical Engineering, max. graduated on 1999
· Candidate must have minimum 10-12 years experience in a large Power Station.
· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a Medium and heavy duty Steam Turbines, Back pressure steam turbines, power pumps, NG gas compressor etc.
· Should be well experienced in the overhaul/Major/ Minor inspections of Steam Turbines and its auxiliaries.
· Should-have- capability of effectively plan, Monitor overhauls schedule to achieve high-reliability and efficiency of the plant.
· Should have experience in troubleshooting of the equipment malfunctions and finalize short term/ long-term corrective actions.
· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents etc.
· Shall be responsible for preparation of maintenance budget, control and effective utilization of the same.
· Should have experience in spare parts planning, purchase and inspection activities.
· Should have good knowledge of computerized Maintenance management system.
· Should have good knowledge of Safety, OHSAS and ISO standards.
13. SR. Engineer Mechanical Maintenance (Boiler)
QUALIFICATIONS
· Degree in Mechanical Engineering, max. graduated on 1999
· Candidate must have minimum 10-12 years experience in a large Power Station.
· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a High pressure Boilers, Heat recovery boilers( NG/LFO firing), High pressure valves, Control valves, Safety Valves, High Pressure piping ,Drum , Burner duct, Diverter Damper ,Boiler tubes /header etc..
· Should be well experienced in the overhaul/Major inspection and trouble shooting of Power /Heat recovery boilers and it's auxiliaries.
· Should-have- capability of effectively plans. Monitor overhauls schedule to achieve high-reliability and efficiency of the plant.
· Should have experience in high pressure welding and NDT test applicable in Boiler Tubes and headers.
· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents maintenance budget, control and effective utilization of the same.
· Having knowledge of standards and practices applicable to Boiler plant equipments will be added advantage.
· Should have good knowledge of computerized Maintenance Management system Safety, OHSAS and ISO standards etc.
14. Engineer Mechanical Maintenance (Boiler)
QUALIFICATIONS
· Degree in Mechanical Engineering, max. graduated on 1999
· Candidate must have minimum 10-12 years experience in a large Power Station.
· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a High pressure Boilers, Heat recovery boilers( NG/LFO firing),High pressure valves, Control valves,Safety Valves, High Pressure piping ,Drum , Burner duct, Diverter Damper ,Boiler tubes /header etc.
· Should be well experienced in the overhaul/Major inspection and trouble shooting of Power /Heat recovery boilers and its auxiliaries.
· Should-have- capability of effectively plans.
· Monitor overhauls schedule to achieve high-reliability and efficiency of the plant.
· Should have experience in high pressure welding and NDT test applicable in Boiler Tubes and headers.
· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents maintenance budget, control and effective utilization of the same.
· Having knowledge of standards and practices applicable to Boiler plant equipments will be added advantage.
· Should have good knowledge of computerized Maintenance Management system Safety, OHSAS and ISO standards etc.
15. SR. Engineer Mechanical Maintenance (Gas Turbine)
QUALIFICATIONS
· Degree in Mechanical Engineering, max. graduated on 1999
· Candidate must have minimum 10-12 years experience in a large Power Station.
· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a Gas Turbines and its auxiliaries. (Preferably Siemens/General Electric Gas Turbines)
· Should be well experienced in the overhaul/Major/ Minor/Annual inspection of Gas Turbines and Its auxiliaries.
· Should-have- capability of effectively plan, Monitor overhauls schedule to achieve high-reliability and efficiency of the plant.
· Should have experience in troubleshooting of the equipment malfunctions and finalize short term/ long-term corrective actions.
· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents etc.
· Responsible for preparation of maintenance budget, control and effective utilization of the same.
· Should have experience in spare parts planning, purchase and inspection activities.
· Should have good knowledge of computerized Maintenance management system.
· Should have good knowledge of Safety, OHSAS and ISO standards.
· Shall be a capable of managing Major/minor overhauls and routine maintenance effectively.
16. Engineer Mechanical Maintenance (Gas Turbine)
QUALIFICATIONS
· Degree in Mechanical Engineering, max. graduated on 1999
· Candidate must have minimum 10-12 years experience in a large Power Station. He Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a Gas Turbines and itsauxiliaries. (Preferably Siemens/General Electric Gas Turbines)
· Should be well experienced in the overhaul/Major/ Minor/Annual inspection of Gas Turbines and Its auxiliaries.
· Should-have- capability of effectively plan, Monitor overhauls schedule to achieve high-reliability and efficiency of the plant.
· Should have experience in troubleshooting of the equipment malfunctions and finalize short term/ long-term corrective actions.
· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents etc.
· Responsible for preparation of maintenance budget, control and effective utilization of the same.
· Should have experience in spare parts planning, purchase and inspection activities.
· Should have good knowledge of computerized Maintenance management system.
· Should have good knowledge of Safety, OHSAS and ISO standards.
· Shall be a capable of managing Major/minor overhauls and routine maintenance effectively.
17. SR. Engineer Mechanical Maintenance (Desalination)
QUALIFICATIONS
· Degree in Mechanical Engineering, max. graduated on 1999
· Candidate must have minimum 10-12 years experience in a large Power Station.
· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a of the Desalination plant of MSF technology, including sea water system, DM water plant, verticalspumps ( BBD/BRP,SEA WATER pumps).
· Should-have- capability of effectively plan, Monitor overhauls/Annual schedule to achieve high-reliability and efficiency of the Desalination plants.
· Should have experience in troubleshooting of the equipment malfunctions and finalize short term/ long-term corrective actions.
· Knowledge of Corrosion technology, including selection of material for different application will have added advantage.
· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents etc.
· Responsible for preparation of maintenance budget, control and its effective utilization of it.
· Must have a good knowledge of standards and practices applicable to Desalination plant equipments.
· Should have experience in spare parts planning, purchase, inspection activities, computerized Maintenance management system, Safety, OHSAS and ISO standards.
18. Engineer Mechanical Maintenance (Desalination)
QUALIFICATIONS
· Degree in Mechanical Engineering, max. graduated on 1999
· Candidate must have minimum 10-12 years experience in a large Power Station.
· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a of the Desalination plant of MSF technology, including sea water system, DM water plant, verticalspumps ( BBD/BRP,SEA WATER pumps).
· Should-have- capability of effectively plan, Monitor overhauls/Annual schedule to achieve high-reliability and efficiency of the Desalination plants.
· Should have experience in troubleshooting of the equipment malfunctions and finalize short term/ long-term corrective actions.
· Knowledge of Corrosion technology, including selection of material for different application will have added advantage.
· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents etc.
· Responsible for preparation of maintenance budget, control and its effective utilization of it. Suitable candidate must have a good knowledge of standards and practices applicable to Desalination plantequipments. Should have experience in spare parts planning, purchase, inspection activities, computerized Maintenance management system , Safety, OHSAS and ISO standards.
19. Asst. Engineer (Mechanical Maintenace)
QUALIFICATIONS
· Degree in Mechanical Engineering, max. graduated on 2003
· 6-8 years experience for degree/Diploma holders.
· Should have worked in a large Power Station of large Petrochemical, Fertilizer factory as a Maintenance Engineer responsible for routine, preventive and breakdown maintenance of a large Power Steam/GasTurbines, Boilers, and Large Pumps etc.
· Should have experience in overhaul Major Inspection of Steam or Gas Turbines.· Should have capability to effectively plan, schedule, and supervise work with highest reliability and productivity.
· Should have experience in troubleshooting equipment malfunctions and select corrective actions.· Should have adequate writing skills to prepare reports and written documents- shall have a good knowledge of standards and practices applicable to power plant equipment
· Should have experience in spare parts planning, purchase and inspection activities.
· Should have knowledge in using computerized Maintenance management system effectively over and above good computer use experience.
· Shall ensure good safety practices in work.
20. Foreman (Mechanical Maintenance)
QUALIFICATIONS
· Diploma in Mechanical Engineering, max. graduated on 2003
· 6-8 years experience in a large power station or similar field like refinery, petrochemical or fertilizer plant.
· Shall have experience in overhaul or major inspection of a large Steam / Gas Turbines, pumps, compressors, boilers, high pressure valves, etc.
· Shall have knowledge of international standards on material and machinery fit standard, tolerances.
· Shall have basic knowledge of ND tests. Shall have experience in planning, scheduling and execution overhaul work.
· Shall have leadership qualities to lead a team of professional technicians for timely and quality work execution.
· Should have experience in computer use for data entry and analysis using a maintenance management system software
· Shall have experience in Pipeline fabrication and or overhaul of large vertical and multistage pumps.
· Should have good experience with renowned maintenance / refurbishment contractors
· Should be safety conscious.
21. Senior Mechanic
QUALIFICATIONS
· Higher Secondary School Certificate followed by Trade School Certificate- Apprenticeship / on job training in power station or continuous process Industry.
· Minimum 8 years experience in maintenance and overhaul of large Steam Turbines and / or Major Inspection of Industrial Gas Turbines.
· Have experience in Overhaul of Large vertical pumps, Power boilers, Multi stage high-pressure pumps etc.
· Capable of independently handling the work allocated to him on overhaul of the equipment referred to above.
· Shall have a fair knowledge of the rigging of parts of large machines and various measuring instruments and precision tools.
· Shall have capability to align turbine to generator.
· Shall be able to read and understand machine drawings and should be familiar with fits and tolerances in assembly of machinery.
· Should be able to converse English language.
General skills and qualifications required:
- Male, Age between 30 45 years old.
- Must have excellent spoken and written in English, other language is highly desirable.
- Working Reference and Computer literate
- A self starter, energetic, good personality, highly motivated and inspirational
- Have excellent communication skills
- Ability to work independently and good team work.
SERIOUS CANDIDATES MEETING ABOVE CRITERIA AND WITH VALID PASSPORT, WILLING TO SUBMIT IT ONCE SHORTLISTED FOR INTERVIEW NEED ONLY APPLY IMMEDIATELY.
Please send the necessary documents at the earliest before September 25, 2009 to:
HRD & GA Division
PT Millenium Muda Mandiri
Menara Hijau, 14th Floor SUITE #1406
Jl. MT Haryono Kav. 33
Jakarta 12700
email:
trainingcentre@ milleniummudaman diri.com or admin1@milleniummud amandiri. com
Our Client from Dubai Electricity & Water Authority (DEWA) is looking for Professional Candidates Engineer to fill the following vacancies in Dubai:
1. Manager Electrical Maintenance
QUALIFICATIONS:
· Post Graduate / Graduate in Electrical Engineering, max. graduated on 1994· Minimum 15 years experience in maintenance of electrical equipment in an electrical power plant / industry for a graduate and 8 years for a post graduate, of which at least 4 years should be in a similar responsible position.
· Shall be responsible for proactive & reliability centered maintenance of electrical equipment and systems installed in a modern GT/ST power and desalination plant.
· Should be able to plan & schedule all maintenance activities with cost effective inventory management and prepare & control budgetary provisions.
· Good co-coordinating, organizing, planning & communication skills are required.
· Should have in depth knowledge of all electrical equipment of a power plant, sequence controls & protections and exposure to Quality, Safety & Environment Management Systems, Root Cause Analysis &computer-aided maintenance techniques.
2. Foreman- Electrical Maintenance
QUALIFICATIONS:
· Diploma in Electrical Engineering, max. graduated on 2002
· Minimum 7 years hands on experience in maintenance of electrical equipment in power stations or process industry.
· Shall be able to supervise, guide and execute routine, breakdown and overhaul maintenance jobs of electrical equipment like Generators, Transformers, LV/HV Motors, Switchgear, EOT Cranes, Batteries,Chargers & Inverters and etc. Knowledge of sequence controls, wiring, schematic drawings & safe work procedures is required.
3. Engineer/ Senior EngineerElectrical Maintenance
QUALIFICATIONS:
· Post Graduate / Graduate in Electrical Engineering, max. graduated on 1997
· Minimum 12 years experience in maintenance of electrical equipment in an electrical power plant / industry for a graduate and 8 years for a post graduate, of which at least 4 years should be in a similar responsible position.
· Shall be responsible for proactive & reliability centered maintenance of electrical equipment and systems installed in a modern GT/ST power and desalination plant.
· Should be able to plan & schedule all maintenance activities with cost effective inventory management and prepare & control budgetary provisions.
· Good co-coordinating, organizing, planning & communication skills are required.
· Should have in depth knowledge of all electrical equipment of a power plant, sequence controls & protections and exposure to Quality, Safety & Environment Management Systems, Root Cause Analysis &computer-aided maintenance techniques.
4. Assistant Engineer- Electrical Maintenance
QUALIFICATIONS:
· Post Graduate / Graduate in Electrical Engineering, max. graduated on 2004
· Minimum 5 years for graduate & 3 years for postgraduate candidate having experience of maintenance of electrical equipment in an electrical power plant or process industry.
· Shall be responsible for supervising reliability- centered maintenance of equipments like Generators, Transformers, HV & LV motors, switchgears, EOT Cranes, Batteries and Chargers & Inverters.
· Good co-coordinating and communication skills are required. A very good computer cognizance is preferred.
5. SENIOR POWER STATION OPERATOR
QUALIFICATIONS:
· Degree / Diploma in Engineering (Mech./Elect. /Power), max. graduated on 2006
· AGE Not more than 35 years
· Minimum 2 5 years experience in operation of a modern gas/thermal power & desalination station.
· The applicant shall be well versed in power / desalination plant operations through DCS system.
· Responsible for monitoring and operating the plant / equipment from the central control boards and optimize plant operation.
· Responsible for satisfactory operation of the assigned plant (Boiler, Turbine, Generator and Desalination Plant) with the appointed crew.
· Supervise, instruct and co-ordinate with the assigned crew efficiency and effectively fulfill their job functions and assignments.
· Check and review the operating conditions and records in order to investigate the weak and troublesome point in advance of any occurrence.
· Maintain the operating equipment and facilities in sound and clean condition.
· Maintain detailed operation logs for all operation activities.
· Carry out isolation of the equipment for planned and emergency maintenance and normalization of the plant thereafter.
· Follow safety rules and ensure close adherence to the safety, environment and quality requirements. Should be willing to work in shifts
6. POWER STATION OPERATOR
QUALIFICATIONS:
· Degree / Diploma in Engineering (Mech./Elect. /Power), max. graduated on 2006
· AGE Not more than 30 years
· Minimum 2 5 years experience in operation of a modern gas/thermal power & desalination station.
· The applicant shall be well versed in power / desalination plant operations through DCS system.
· Responsible for monitoring and operating the plant / equipment from the central control boards and optimize plant operation.
· Responsible for satisfactory operation of the assigned plant (Boiler, Turbine, Generator and Desalination Plant) with the appointed crew. Supervise, instruct and co-ordinate with the assigned crew efficiencyand effectively fulfill their job functions and assignments.
· Check and review the operating conditions and records in order to investigate the weak and troublesome point in advance of any occurrence.
· Maintain the operating equipment and facilities in sound and clean condition.
· Maintain detailed operation logs for all operation activities.
· Carry out isolation of the equipment for planned and emergency maintenance and normalization of the plant there after.
· Follow safety rules and ensure close adherence to the safety, environment and quality requirements. Should be willing to work in shifts.
7. SENIOR ENGINEER - I&C MAINT.
QUALIFICATIONS:
· B.Sc in Electrical / Electronics / Instrument Engineer, max. graduated on 2004
· 5 10 years experience in diagnostic check, troubleshooting and maintenance of instrumentation and control in Power plant.
· Through understanding of Control Loops.
· Field instruments and Control Actuator, Calibration and Maintenance, Knowledge and working experience on different control system such as DCS, PLC, Fire Fighting System.
· Practical experience in ABB PROCONTROL P-13 / P14 / PMS & POS, GE -Speedtronic Mark VI, ABB DCS INFI 90 / Symphony, Siemens DCS- Teleperm ME / Teleperm XP, Simadyn D Controller, Toshiba DCS TOSMAP, PLC SIAMTIC S5 / S7, CEGELEC PLC, Allen bardley PLC, HIMA PLC.
· Fire fighting and detection system Minimax / Simplex capability.
· Self motivated, ability to work under pressure, good supervisory and reporting correspondences.
· Awareness of personnel and equipment safety standard, Environmental protection standard and Quality management system.
8. ENGINEER - I&C MAINT.
QUALIFICATIONS:
· B.Sc in Electrical / Electronics / Instrument Engineer, max. graduated on 2004
· 5 10 years experience in diagnostic check, troubleshooting and maintenance of instrumentation and control in Power plant.
· Through understanding of Control Loops.
· Field instruments and Control Actuator, Calibration and Maintenance, Knowledge and working experience on different control system such as DCS, PLC, Fire Fighting System.
· Practical experience in ABB PROCONTROL P-13 / P14 / PMS & POS, GE -Speedtronic Mark VI, ABB DCS INFI 90 / Symphony, Siemens DCS- Teleperm ME / Teleperm XP, Simadyn D Controller, Toshiba DCS TOSMAP, PLC SIAMTIC S5 / S7, CEGELEC PLC, Allen bardley PLC, HIMA PLC.
· Fire fighting and detection system Minimax / Simplex capability.
· Self motivated, ability to work under pressure, good supervisory and reporting correspondences.
· Awareness of personnel and equipment safety standard, Environmental protection standard and Quality management system.
9. ASSISTANT ENGINEER - I&C MAINT.
QUALIFICATIONS:
· B.Sc in Electrical / Electronics / Instrument Engineer, max. graduated on 2004
· 5 10 years experience in diagnostic check, troubleshooting and maintenance of instrumentation and control in Power plant.
· Through understanding of Control Loops.
· Field instruments and Control Actuator, Calibration and Maintenance, Knowledge and working experience on different control system such as DCS, PLC, Fire Fighting System.
· Practical experience in ABB PROCONTROL P-13 / P14 / PMS & POS, GE -Speedtronic Mark VI, ABB DCS INFI 90 / Symphony, Siemens DCS- Teleperm ME / Teleperm XP, Simadyn D Controller, Toshiba DCS TOSMAP, PLC SIAMTIC S5 / S7, CEGELEC PLC, Allen bardley PLC, HIMA PLC. Fire fighting and detection system Minimax / Simplex capability.
· Self motivated, ability to work under pressure, good supervisory and reporting correspondences.
· Awareness of personnel and equipment safety standard, Environmental protection standard and Quality management system.
10. I&C FOREMAN
QUALIFICATIONS:
· Diploma in Electronics, Instrumentation & Control or Electrical Engineer, max. graduated on 2002
· Minimum 7 years experience in Power and Desalination Plant Instrumentation & Control System.
· Carry out of the repair and maintenance work of all types of field instruments such as temperature, pressure, level, vibration, speed, flame detectors, transmitters, switches, gauges, recorders andanalyzers.
· Calibration and maintenance of various types of control actuators e.g. Hydraulic, pneumatic and motorized control valves.
· Work experience of various types of workshop test equipment.
· Supervision ability and guidance of work crafts and reporting capability. Self motivated and can work under pressure.
· Should have awareness of personnel and equipment safety such as PLC, DCS and through understanding of control loops.
11. SR. Engineer Mechanical Maintenance (Steam Turbine)
QUALIFICATIONS:
· Diploma in Electronics, Instrumentation & Control or Electrical Engineer, max. graduated on 2002
· Minimum 7 years experience in Power and Desalination Plant Instrumentation & Control System.
· Carry out of the repair and maintenance work of all types of field instruments such as temperature, pressure, level, vibration, speed, flame detectors, transmitters, switches, gauges, recorders andanalyzers.
· Calibration and maintenance of various types of control actuators e.g. Hydraulic, pneumatic and motorized control valves.
· Work experience of various types of workshop test equipment.
· Supervision ability and guidance of work crafts and reporting capability. Self motivated and can work under pressure.
· Should have awareness of personnel and equipment safety such as PLC, DCS and through understanding of control loops.
12. Engineer Mechanical Maintenance (Steam Turbine)
QUALIFICATIONS
· Degree in Mechanical Engineering, max. graduated on 1999
· Candidate must have minimum 10-12 years experience in a large Power Station.
· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a Medium and heavy duty Steam Turbines, Back pressure steam turbines, power pumps, NG gas compressor etc.
· Should be well experienced in the overhaul/Major/ Minor inspections of Steam Turbines and its auxiliaries.
· Should-have- capability of effectively plan, Monitor overhauls schedule to achieve high-reliability and efficiency of the plant.
· Should have experience in troubleshooting of the equipment malfunctions and finalize short term/ long-term corrective actions.
· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents etc.
· Shall be responsible for preparation of maintenance budget, control and effective utilization of the same.
· Should have experience in spare parts planning, purchase and inspection activities.
· Should have good knowledge of computerized Maintenance management system.
· Should have good knowledge of Safety, OHSAS and ISO standards.
13. SR. Engineer Mechanical Maintenance (Boiler)
QUALIFICATIONS
· Degree in Mechanical Engineering, max. graduated on 1999
· Candidate must have minimum 10-12 years experience in a large Power Station.
· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a High pressure Boilers, Heat recovery boilers( NG/LFO firing), High pressure valves, Control valves, Safety Valves, High Pressure piping ,Drum , Burner duct, Diverter Damper ,Boiler tubes /header etc..
· Should be well experienced in the overhaul/Major inspection and trouble shooting of Power /Heat recovery boilers and it's auxiliaries.
· Should-have- capability of effectively plans. Monitor overhauls schedule to achieve high-reliability and efficiency of the plant.
· Should have experience in high pressure welding and NDT test applicable in Boiler Tubes and headers.
· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents maintenance budget, control and effective utilization of the same.
· Having knowledge of standards and practices applicable to Boiler plant equipments will be added advantage.
· Should have good knowledge of computerized Maintenance Management system Safety, OHSAS and ISO standards etc.
14. Engineer Mechanical Maintenance (Boiler)
QUALIFICATIONS
· Degree in Mechanical Engineering, max. graduated on 1999
· Candidate must have minimum 10-12 years experience in a large Power Station.
· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a High pressure Boilers, Heat recovery boilers( NG/LFO firing),High pressure valves, Control valves,Safety Valves, High Pressure piping ,Drum , Burner duct, Diverter Damper ,Boiler tubes /header etc.
· Should be well experienced in the overhaul/Major inspection and trouble shooting of Power /Heat recovery boilers and its auxiliaries.
· Should-have- capability of effectively plans.
· Monitor overhauls schedule to achieve high-reliability and efficiency of the plant.
· Should have experience in high pressure welding and NDT test applicable in Boiler Tubes and headers.
· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents maintenance budget, control and effective utilization of the same.
· Having knowledge of standards and practices applicable to Boiler plant equipments will be added advantage.
· Should have good knowledge of computerized Maintenance Management system Safety, OHSAS and ISO standards etc.
15. SR. Engineer Mechanical Maintenance (Gas Turbine)
QUALIFICATIONS
· Degree in Mechanical Engineering, max. graduated on 1999
· Candidate must have minimum 10-12 years experience in a large Power Station.
· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a Gas Turbines and its auxiliaries. (Preferably Siemens/General Electric Gas Turbines)
· Should be well experienced in the overhaul/Major/ Minor/Annual inspection of Gas Turbines and Its auxiliaries.
· Should-have- capability of effectively plan, Monitor overhauls schedule to achieve high-reliability and efficiency of the plant.
· Should have experience in troubleshooting of the equipment malfunctions and finalize short term/ long-term corrective actions.
· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents etc.
· Responsible for preparation of maintenance budget, control and effective utilization of the same.
· Should have experience in spare parts planning, purchase and inspection activities.
· Should have good knowledge of computerized Maintenance management system.
· Should have good knowledge of Safety, OHSAS and ISO standards.
· Shall be a capable of managing Major/minor overhauls and routine maintenance effectively.
16. Engineer Mechanical Maintenance (Gas Turbine)
QUALIFICATIONS
· Degree in Mechanical Engineering, max. graduated on 1999
· Candidate must have minimum 10-12 years experience in a large Power Station. He Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a Gas Turbines and itsauxiliaries. (Preferably Siemens/General Electric Gas Turbines)
· Should be well experienced in the overhaul/Major/ Minor/Annual inspection of Gas Turbines and Its auxiliaries.
· Should-have- capability of effectively plan, Monitor overhauls schedule to achieve high-reliability and efficiency of the plant.
· Should have experience in troubleshooting of the equipment malfunctions and finalize short term/ long-term corrective actions.
· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents etc.
· Responsible for preparation of maintenance budget, control and effective utilization of the same.
· Should have experience in spare parts planning, purchase and inspection activities.
· Should have good knowledge of computerized Maintenance management system.
· Should have good knowledge of Safety, OHSAS and ISO standards.
· Shall be a capable of managing Major/minor overhauls and routine maintenance effectively.
17. SR. Engineer Mechanical Maintenance (Desalination)
QUALIFICATIONS
· Degree in Mechanical Engineering, max. graduated on 1999
· Candidate must have minimum 10-12 years experience in a large Power Station.
· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a of the Desalination plant of MSF technology, including sea water system, DM water plant, verticalspumps ( BBD/BRP,SEA WATER pumps).
· Should-have- capability of effectively plan, Monitor overhauls/Annual schedule to achieve high-reliability and efficiency of the Desalination plants.
· Should have experience in troubleshooting of the equipment malfunctions and finalize short term/ long-term corrective actions.
· Knowledge of Corrosion technology, including selection of material for different application will have added advantage.
· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents etc.
· Responsible for preparation of maintenance budget, control and its effective utilization of it.
· Must have a good knowledge of standards and practices applicable to Desalination plant equipments.
· Should have experience in spare parts planning, purchase, inspection activities, computerized Maintenance management system, Safety, OHSAS and ISO standards.
18. Engineer Mechanical Maintenance (Desalination)
QUALIFICATIONS
· Degree in Mechanical Engineering, max. graduated on 1999
· Candidate must have minimum 10-12 years experience in a large Power Station.
· Must have worked as a Maintenance Engineer involving routine, preventive and breakdown maintenance of a of the Desalination plant of MSF technology, including sea water system, DM water plant, verticalspumps ( BBD/BRP,SEA WATER pumps).
· Should-have- capability of effectively plan, Monitor overhauls/Annual schedule to achieve high-reliability and efficiency of the Desalination plants.
· Should have experience in troubleshooting of the equipment malfunctions and finalize short term/ long-term corrective actions.
· Knowledge of Corrosion technology, including selection of material for different application will have added advantage.
· Should have adequate writing/communicati on skills to prepare reports, tender specifications, contract documents etc.
· Responsible for preparation of maintenance budget, control and its effective utilization of it. Suitable candidate must have a good knowledge of standards and practices applicable to Desalination plantequipments. Should have experience in spare parts planning, purchase, inspection activities, computerized Maintenance management system , Safety, OHSAS and ISO standards.
19. Asst. Engineer (Mechanical Maintenace)
QUALIFICATIONS
· Degree in Mechanical Engineering, max. graduated on 2003
· 6-8 years experience for degree/Diploma holders.
· Should have worked in a large Power Station of large Petrochemical, Fertilizer factory as a Maintenance Engineer responsible for routine, preventive and breakdown maintenance of a large Power Steam/GasTurbines, Boilers, and Large Pumps etc.
· Should have experience in overhaul Major Inspection of Steam or Gas Turbines.· Should have capability to effectively plan, schedule, and supervise work with highest reliability and productivity.
· Should have experience in troubleshooting equipment malfunctions and select corrective actions.· Should have adequate writing skills to prepare reports and written documents- shall have a good knowledge of standards and practices applicable to power plant equipment
· Should have experience in spare parts planning, purchase and inspection activities.
· Should have knowledge in using computerized Maintenance management system effectively over and above good computer use experience.
· Shall ensure good safety practices in work.
20. Foreman (Mechanical Maintenance)
QUALIFICATIONS
· Diploma in Mechanical Engineering, max. graduated on 2003
· 6-8 years experience in a large power station or similar field like refinery, petrochemical or fertilizer plant.
· Shall have experience in overhaul or major inspection of a large Steam / Gas Turbines, pumps, compressors, boilers, high pressure valves, etc.
· Shall have knowledge of international standards on material and machinery fit standard, tolerances.
· Shall have basic knowledge of ND tests. Shall have experience in planning, scheduling and execution overhaul work.
· Shall have leadership qualities to lead a team of professional technicians for timely and quality work execution.
· Should have experience in computer use for data entry and analysis using a maintenance management system software
· Shall have experience in Pipeline fabrication and or overhaul of large vertical and multistage pumps.
· Should have good experience with renowned maintenance / refurbishment contractors
· Should be safety conscious.
21. Senior Mechanic
QUALIFICATIONS
· Higher Secondary School Certificate followed by Trade School Certificate- Apprenticeship / on job training in power station or continuous process Industry.
· Minimum 8 years experience in maintenance and overhaul of large Steam Turbines and / or Major Inspection of Industrial Gas Turbines.
· Have experience in Overhaul of Large vertical pumps, Power boilers, Multi stage high-pressure pumps etc.
· Capable of independently handling the work allocated to him on overhaul of the equipment referred to above.
· Shall have a fair knowledge of the rigging of parts of large machines and various measuring instruments and precision tools.
· Shall have capability to align turbine to generator.
· Shall be able to read and understand machine drawings and should be familiar with fits and tolerances in assembly of machinery.
· Should be able to converse English language.
General skills and qualifications required:
- Male, Age between 30 45 years old.
- Must have excellent spoken and written in English, other language is highly desirable.
- Working Reference and Computer literate
- A self starter, energetic, good personality, highly motivated and inspirational
- Have excellent communication skills
- Ability to work independently and good team work.
SERIOUS CANDIDATES MEETING ABOVE CRITERIA AND WITH VALID PASSPORT, WILLING TO SUBMIT IT ONCE SHORTLISTED FOR INTERVIEW NEED ONLY APPLY IMMEDIATELY.
Please send the necessary documents at the earliest before September 25, 2009 to:
HRD & GA Division
PT Millenium Muda Mandiri
Menara Hijau, 14th Floor SUITE #1406
Jl. MT Haryono Kav. 33
Jakarta 12700
email:
trainingcentre@ milleniummudaman diri.com or admin1@milleniummud amandiri. com
Subscribe to:
Posts (Atom)
